tym 273

Hi all, it has been some time since I posted anything. I lost a pivot pin on my LJ200 loader (lower most front). I can not seem to find a P/N anywhere on the web. Does anyone know of a good dealer who has parts diagrams and can get this item? My dealer is long gone and being up in the northeast...

I have a significant leak of hydraulic fluid.. it appears to be from near the adaptor plate at the rear of the torque converter. Has anyone had a similar problem? If so how did you fix it? Had anyone split their tractor? If so how. Tips and tricks please.... Any ideas on where the oil may be...

Hello TYM owners. Bought a used TYM 273 a year or so ago with some cool attachments to add to my existing NH collection. I started using it to chip some willow limbs a couple weeks ago and started experiencing some trouble with the PTO not starting after I moved to the next pile of limbs. The...

Purchased TYM 273 in 2008. We have been maintaining (including having the frame welded when it split in two - seriously!) The issue is that when the key is turned to 'start' the tractor starts just fine and if you HOLD the key in the Start position, you can drive it - keeps running. As soon...

Hi, I've never posted on this forum but I've used it extensively to diagnose and repair my TYM. So this will be my chance to give back a little. :) I have a 2008 273 that I purchased new, but now needs some TLC so I decided a seat replacement was in the works. After searching ebay, amazon and...

My joystick will not advance the lift portion of the loader valve. The tilt portion is operational. Anyone have or know where I can get an exploded parts diagram of the valve. I'd like to know what I am getting in to. Any thoughts on diagnostics, repairs would be appreciated.

Hey all, I have a tym 273. I am having trouble with pto. I engage lever to on and when I press the engage button on dash it lights up and pto spins but won't stay on. As soon as I release button it turns off. Am I doing something wrong? Defective button?? Help. Haha. Kyle

Hi, I had my frame crack on right side when fel attaches to frame. Right at the bolts. I saw a few other post about it. Does anyone have any pictures of the repairs they made? I welded back together. But want to reinforce big-time. I sold my sub frame mounted backhoe and kept the...

Have a leak and need to remove steering wheel. removed cover and retaining nut now?

.. well starts and chugs a bit then cuts out. Is there some priming pump I can muck with? Thanks for any help Chris

I had my transmission to HST drive shaft go a while back and replaced it with the newer style. Now after pushing RI snow all winter my front drive shaft appears to be shot. I did not remove the shrouds yet to look at it due to weather but it is loose and spinning (or not spinning) in 4 wheel...

I have a TYM 273 with mid mounted mower (TYM). Tractor has done 700 hrs and bought 3 mths ago s/h. The more I use it the more it leaks HST oil from the filler/breather at the top of the transmission. I am planning to service the transmission shortly but reluctant until I understand why it is...

Hey guys first off I'm new to the site just wanted to say thanks for the help in advance. Ok just purchased tym 273.... After it warms up the gauge keeps Climbing until I stop working it and antifreeze runs out the Overspill tube by the cap.....is this a stuck thermostat and if so Where...

Hauling buckets of gravel out of my gully today and the tractor would barely get up the hill out of the bottom. Have gone up the same hill for a couple of years with no problem. Full throttle and tractor slows, engine bogs down, RPM start to drop, have to keep easing up on the foreward pedal...

Hi all, I have a TYM 273, great little tractor, that I need to replace the battery in. The battery measures approximately 7" wide by 5" deep by 8" high, I have looked in all of the normal locations, Tractor Supply, Rural King and all of the auto parts stores but I have not been able to find a...

Does anyone know what the part # for the glow plugs on the Mitsubishi s3l motor used by TYM? I can't find it listed in any catalogs. I would like to buy it threw my local napa store. Thanks in advance. Any other part # from NAPA would be very helpful. Fuel, air , etc.. My TYM dealer closed up...

I am having a problem with my glow pugs burning up and the dealer tells me he doesn't know why and that they never seen or heard of this problem before. I do not know where to buy new glow plugs at a good price? I do not want to replace the glow plugs just to have them burn up again before the...

I don't really want to pile on or become a TYM basher but I figured I would alert you 2xx series owners to a few recent issues. 1. Gauge cluster failure - my dash gauges just quit working - solution warranty replacement. 2. Blown hydraulic steering hose - I had heard folks comment on hydraulic...

My 273 with FEl and BH that blows Hyd fluid from the vent hose. The fill cap located on top of the selector valve for the hoe has a vent hole and there is also a vent tube coming out of the case. When I noticed the problem I plugged the hole in the cap thinking it didn't need 2 vents and that...

Has anyone had problems with their 273? I see alot of you swear by this tractor. I bought one about a year ago and am happy, I don't use it commercially just around the "ranch", I have 20 acres that are pretty neglected. I have run across a couple of anoyances that are not problematic enough...

Can anyone tell me how hard it is to install the backhoe yourself. (Frame mounting)?

I finally drove one today while looking at a Montana. Montana is not my cup of tea. I was very impressed with the TYM 273. I don't like Hydro and I liked this one.....love the dual pedals vs that horrible toggle pedal most hydro's come with. What is the HP at the PTO?? I can't find it...

I'm trying to decide on my 1st tractor for about 8 acres, some hilly wooded and some flat/wooded/grass general landscaping/cleanup/pathbuilding. It's really down to the kubota b7610/7800 or the TYM 233/273. I like the TYM for the size/weight/lift capacities/quick detach bucket but I am...