yanmar 1500

I own a yanmar 1500 with transmission problems, tooth missing on 3rd gear and bearing noise. I found a ym2000 parts tractor and was wondering if the transmissions are the same or completely different between the two. It only has 240 hrs and is a great little tractor with a loader, but it seems...

Hello everyone, so I've acquired a yanmar with wheels that are rusted out by the valve stem and apparently they are unavailable anywhere.. looking for ideas for repair or possible replacement.. New to this acquiring info

Does anyone have a transmission for a Yanmar 1500 for sale?

Does anyone have a transmission for a Yanmar 1500 for sale?

So I finally got a chance to use my new post hole digger with my old Yanmar 1500 tractor. I checked that the PTO turned and turned the gearbox and auger after I installed it so I thought I was good to go. However, when I started the first post hole, as soon as it barely made contact with the...

I have a Yanmar 1500 with a 2tr15 engine. Does anybody have any info on setting the governor, the manual is horrible

Hey every body I need some parts for my yanmar 1500 like transmission parts any body got any leads I have broken gear in the transmission

Good morning. I need to check out my clutch and probably need to replace it. Hoye has a video about splitting the tractor and replacing the clutch. I kinda wanted to see if maybe something else was out there about splitting the 1500 and or clutch replacement. Also would really love to make...

I recently bought the tractor but only realized when I got it back to the shop that it was missing more than just the steering Colum. it appears to also be missing the steering box as well. the former owner had hooked up a chuck of wood with a handle on the side of the tractor, connected to the...

Where is the cheapest place to buy a yanmar 4 wire regulator for a ym1500

I've got a new to me yanmar 1500 that I've had for about a month and have just noticed while driving it around that oil was leaking from somewhere onto the steering gearbox. I thought initially that it was diesel fuel leaking somehow until I looked under the dash and noticed a hole in the...

Hi. I need a Yanmar 1500 tractor with small tiller shipped from Decatur, Al to Walnut Creek, CA. The items weigh 1430, the length is 102", the width is 42" and the height is approximately 6'.

yanmar ym 15 diesel tractor will turn over but will not crank comes with box blade bush hog tiller - Garden - Double Springs, Alabama - Marketplace | Facebook Someone thought it was a good buy. Never seen so many yanmar for sale around the area before

Glad to be here. I just bought a Yanmar 1500 4wd. Loving this little work horse - have a lot to learn. Here she is: Yanmar 1500 4x4 4 wheel drive tractor - YouTube Look forward to interacting with y'all =)

Where is the oil drain plug on 1500D ?

I am considering a Yanmar 1500 4wd. Hoye lists the 1500 as a preferred model for parts. I have never owned a Yanmar so I'm looking for input, the good, the bad, the ugly.

hi everyone. on my 1500 I cannot get the pto to stop . it will only stop when I step on the clutch. any info on this and how the pto operating lever is suppose to work would be great. thanks jim

hello everyone iam new to the forum as of now. I spent 8 hours on the road yesterday to pickup a yanmar 1500 tractor. does anyone know where I can download a owners and sevice manual. iam interested in any and all attachments for it. my main plans on buying it was to plow snow at my my home...

Original tires are finally shot so looking to replace them. Has anyone had experience using 9.5/22 rear tires on the 1500? According to Hoye, Tire Number Explanation, they claim this should work. Most 9.5 inch tires recommend an 8 inch wheel while the 8.3 inch tire on the 1500 says a 7 inch...

need advice on sticking brakes. has anyone serviced brakes, how to fix .

I'm not sure what to do with my Yanmar. The PTO Speed Fork is broken and a gear is missing teeth. $200 or so in parts. That job may be too much for my skills and tools to handle. Probably cost $1500 to have someone fix it. The FEL still works great, it runs well and has good tires, but the...

Hi, Elba Mike here, new to forum. I have the pto shifter gear box open and need to replace the internal shift parts. Is there an "easy" way to do this? I didn't find this on a forum search. Be nice now, I'm a city boy working on my first tractor. Yanmar 1500

Howdy folks, first ever post on the site and hope for some tech help to save the day, particularly mine! I have a Yanmar 1500 and noticed the shifter getting sloppy and moving up and down. I have the one piece shifter case so I had to take it loose and pull the entire shift cover case (w/ 4...

Hi guys, new here, i have a ford 8 N i was thinking about trading for a yanmar 1500 ... is this a good trade? are the 1500s good? or is there lots of trouble with them? i dont know anything about them. my 8 N works fine and everything runs good with it, i was just looking for something a...

Yanmar 1500 was on a hill, nose pointed downward, while operating a posthole digger in idle position. Engine got very hot. It will still run but makes a different noise and not as much power as before. Haven't checked for metal flakes in oil yet. If none are present, is there something else to...

Hi. I was wondering if anyone could direct me to a dealer who services Yanmar tractors in Western PA/Eastern OH. I have a Yanmar 1500 that I want to get a FEL for but I don't want to install it myself. My wife uses the tractor occasionally and I don't want anything to happen to her because I did...

It has been a week since I changed the motor oil and filter, drained transmission, removed hydraulic filter and cleaned and replaced it,filled trans with new fluid, changed fuel filter. I asked if there was a way to purge the air from the system and told to move the 3 pt up and down to remove...

I basically need to replace most of the external parts for the PTO on a Yanmar 1500 Including the housing any help here? Any Idea for used parts?

Hello I just bought 3.5 acres that I now need to mow. I bought a international 330 w/FEL and mower then I decided it was to big and traded it for a Yanmar 1500D now I would like find a owners/operator manual. I read some stuff on here and now know this is a grey market tractor and kinda...

Hello everyone, This is my first post and I'm sure I will have many more after this one. I recently bought a Yanmar 1500 and it is my first tractor. It came with a Woods RM59 finish mower and a 4' box blade. The guy I bought it from could tell a lot about it and I have been able to use this...

I have a 1979 Yanmar 1500 purchased with no manuals or instructions. Beneath the seat there is a valve with a handle resembling a water spigot handle. Fluid is leaking from the stem of this valve and I need to know it's purpose and where to find repair information! Thanks for your help! :confused2:

I was getting tired of watching my temp gauge crawl into the overheat zone while bushhogging so I came up the following fix for my pumpless 1500D. Using an auxiliary heater pump out of a high end Mercedes, I spliced it into the lower radiator hose on the tractor. It is tight with the connectors...

Is there some place on the web that I can find yanmar tractor parts other than Hoye tractor? New or uused, it does not matter.

I just purchased a Yanmar 1500 and am happy with the tractor. I was just wondering if I should add on a temp gauge from Hoye. My dash is pretty full with turn signal,horn and light switch along with the warning lights. If I use the bracket with the gauge on the website it seems like it would...

Hello All, My 1500 Yanmar Tiller, Model RSB, now needs new tines, I called a Vendor here on the board and he has asked me if they are 10mm or 12mm holes in the tines. Anyone here have any idea? I have no way of measuring these Thank you all in advance for any info you can share Rick

Both fuel lines that originate at the fuel pump and terminate at the injectors have worn and are leaking where the lines bend around the front of the engine block.I removed the lines and tried wrapping them with copper wire impregnated with JB Weld thinking that since they were small holes then...

I just bought a Yanmar 1500 but not picked it up yet. It has a 6 spline PTO and I am just wanting information about about the tractor. Are they a good performer? Anyone have trouble finding normal AG rear tires? I think this one has 22 inch on it. If someone can verify that. What are the pro's...

Here is a rather simple question? Where is the alternator located on a ym1500? The battery is not charging, but I can not seem to find the alternator. (it may not have one!?!?!?) I bought this used, and have changed MANY alternators on many things. I am thinking that this tractor simply is...

I just bought a YM1500. The lift arms are stuck in the UP position. I have removed the dial nob below the seat, and the thing that it depresses when it is opened and closed does not seem to move. The fluid is milky - water, but the internal parts seem to be in good shape. No rust, etc. I...

any one know what to use to get sleeve out. have been to parts ste has a wet sleeve puller. motor still in tractor so taking it some place is out. has anyone done this before and how hard of a job is it. hate to get in over my head.

I am looking for a fuel filter that really fits my Yanmar 1500. I have tried the Wix 33262 & napa 3262. They barely fit, and are really about 1/8 inch too long. I notice Hoye tractor lists a filter for the 1500, but is it really any different from the ones I have tried? Has anyone out there...

my 1500 blew a head gasket and put some water in the crankcase. i think i caught it before any damage was done, but here's my question. the old gasket was damaged in 2 seperate places, so i didn't look any further for a problem. i put a new head gasket on, ran it approx 30min. all looked good...

My buddy has a YM1500 and want's to find a source for parts in the Northwest. 2 questions: Does anyone know where to find parts (nothing specific right now). Is there a non grey market tractor that uses the same parts? Harris

Does someone know if the rear axel can handle 20 inch wide turftires? I´m afraid it will break when i turn. The thing is that i got the tires wery cheap, and it would be cool if i could use them since i alredy bought them. The rice tires i got on now is 10 inches wide. It´s the tires on the...

I have had a Yanmar 1500 for about 8 to 10 years. Never had any problem until summer before last. The idiot (hot) light started coming on- it does not come on when I use it during the winter. I have tried running straight water in the radiator, and have also tried running a product by...

Anybody have any ideas if a 4 foot yanmar tiller (model 1500) will work with john deere 790? was told that it may contact the rear tires at times. was also told that with the four wheel drive that this would not be a problem. thanks

Went to Fredrick's in Hartselle, AL, today and bought a 1500 with tiller, box blade, 4 suitcase weights, and rotary cutter. Also included overunning clutch and manual. Total was $3750. Supposed to be delivered Friday morning. I was able to meet the mechanic, Brent, who will be building my...

Hey All I have just been reading a lot of good information from you all BUT....... I have not been seeing anybody ask about the part number for an OIL FILTER for my YM1500. I am a new owner of a YM1500 with a custom front loader built in Northern Washington state and just love it even with the...

The lift arms on my Yanmar 1500 will not lower. I tried turning the round knob at the front of the seat, but this did not seem to help. It seemed like there was no resistance when the knob was turned. I then removed the plate at the top of the piston (the head I guess) and then removed the...

THE 3-POINT LIFT ON THE BACK OF MY YANMAR 1500 WILL RAISE, BUT IT WON'T LOWER. CAN ANYONE TELL ME WHAT I NEED TO LOOK AT. I HAVE REMOVED THE FRONT AND BACK COVERS FROM THE PISTON AND AM ABLE TO MOVE THE LIFT ARMS UP AND DOWN, BUT ONLY WITH GREAT DIFFICULTY. HELP !!!

Anyone know the capacity of the cooling system on a 1500 so I can get the 30% AF right? Thanks

Took the tractor out to do some tilling. Had put a temp gauge on a few days ago. After tilling about 15 nmin I notice the temp over 250 deg. Tractor did not get hot. I pulled the gauge and checked with boiling water and water boil at 212 on the gauge. What going on??? :(

For some reason my posts don't seem to be showing up. At great risk of repeating myself for the third time (I'll make it short), what kind of fluid goes into a Yanmar 1500 transmission? I got some 80, 90 gear oil at the automotive store but I'm afraid to put it in. Also how do you know how...

Yes it is I again. I'm wondering what is involved in replacing a seal on a hydraulic piston. The furthest out piston on my bucket has a slight leak. I think it is the seal where the inner shaft slides in and out. I'm fairly competent when it comes to fixing basic stuff. Is this a job I want...

Hi folks! I've been looking for awhile for a Yanmar 1500D with a front loader or an equivalent compact tractor local to me (within say, 50-100 miles or so). I've found a Power-trac 418 that someone is selling locally. This is a small articulated tractor with built-in hydraulics, 4 wheel...

My cousin "inherited" a 1500 that we were finally able to start by pulling. It belched a lot of black smoke and had zip for power. My JD 790 manual says the fuel pump might be out of timing. How does one check the fuel pump timing on it? I hate to strart taking things off looking for timing...

I have a Yanmar 1500 (gray market) tractor. I have been unable to find an air filter for this tractor at any of the local tractor dealers. Does anyone know where I might find one ?