yanmar 2000

I recently posted about a Yanmar 1500 on Craigslist that I intended to look at. It sold before I had a chance to look at it. I am now looking at two other Yanmars on Craigslist, a F195 4wd with a 5' finish mower listed at $2950, and a YM2000 2wd with a 4' bush hog and 4' finish mower listed at...

I'm thinking about trenching a line to my shed that's about 300 feet from available power. My question is can the Yanmar 2000 2wd handle a subsoiler? Is it a waste of time and money? Thanks!

My first post - be gentle :) I've got a YM1700 I really like, plan to keep it forever. Locally is a YM2000 for sale with a "bad engine" (nope, don't know more than that). I was thinking of getting it for parts cause ascetically it's in better shape than my running fine YM1700. Thing is I...

Does anyone have a good source for old Yanmar tractor parts (other than Hxxx). I inherited a Model 2000 2wd Yanmar (green) that has just the housing on the RH side, but nothing else. No bolts, springs, shoes, or brake drum. I don't know what other parts I might need. I see the parts breakdown...

I saw this Yanmar on craigslist and it looked like it would fit my needs. I just bought 5 acres and will need to do some clearing. Nothing major mostly brush. Anyway, Probably paid way too much but he did deliver it from half a state away.

How in the universe do you remove the rear hub? Please any info is more than i have...and yes i have tried several different pullers....nothing fits...??????

I have owned my Yanmar 2000 for about eight years. I live in Tullahoma Tennessee very close to the large but now closed used Yanmar dealer, Tullahoma tractor. I looked for a long time and bought the best looking YM2000 I could find and it has been an excellent tractor. it read 720 hours when...

Thinking about getting a 2000 Yanmar tractor. I now have a Yanmar 1500 that I've had for over 10 years with very little problems. I need a few more HP and I think that the 2000 will give me that. Is the 2000 as reliable as the 1500? How about parts, are they available?

Has anyone had experience with VN Tractors. Inc.?

I think I seen somewhere on this site if tractor starts and died and if there is water bubbling in radiator this means????

How do I check the oil level if there is no actual dipstick? Just put enough in that I can see the oil? Thanks.

This is an older Yanmar I purchased that was not running. I added a fuel filter (the fuel tank was connected directly to the injector pump), replaced the started solenoid, rebuilt the starter, replaced the ignition switch, and rebuilt the injectors. Now the tractor does a good job of trying to...

I disassembled my YM 2000 rear axle hub and found the leaking oil seal and the race that it rides on was worn badly. The Seal is a NOK AE3045E. I cannot find one anywhere and Hoye Tractor does not list an oil seal for the axle. Has anyone had any luck cross referencing it over to another...

I can't get forks on my shifter assembly in right location...please help. It works in reverse tor a minute but that's it won't change gears and stalls out. Links, step by step, or illustration. Hi was popping out so I inspected gears, I can live with low for now but have to get it properly...

I'm trying to find torque specs for water pump for Yanmar 2000. I've searched through the forums and couldn't find this info, but I'm new so I could have missed it! :) Thanks in advance!

This a tractor that I bought a little while back just to mess around with been setting in a barn for a while, I had the injector pump rebuilt, it had one stuck plunger,, will crank right up now but I am getting white smoke out of the exhaust, would a clogged injector cause this

does any one have knowledge on power assist on a yanmar 2000? it has a loader and we sold it to a customer. he brought it back due to some leaks on the hoses and we discovered the power steering wasn't working. mechanic took a small spring out of a tube looking piece and it was broke. there was...

I put a brand new steering box on this tractor last summer (less than 15 hours ago). At the very end of my bushhogging today, hit a small stump while turning and POP- steering wheel went loose,lost all steering. what happened was that the bolts from the steering shaft to the box must have been...

1. Where is the filter? 2. Does anyone have a part #? 3. Where can you order one?

Do the Yanmar 2000 differential, transmission, and 3 point lift all use the same fluid? What is that fluid: Hydraulic or 80 or 90 wt. oil?

I have a Yanmar 2000 that has been rebuilt from the head to the crank and still blows oil drops from the Exaust stack . I"ve taken the Exaust manifold off and shined a light in and you can see a stream of oil coming out . I ran the tractor about an hour one day and the next morning checked the...

Hello Everyone, I have 9.5 acres in Puckett, MS (Home of 300 good and friendly folks and a few ole soreheads). I just bought a Yanmar 2000 and I went so far as to order a manual for it. I am trying to find out what all of the controls are on the instrument panel. The manual that I received...

Okay guys -- What's with the YM 2000BD vs the YM G 2000D vs the most referenced generic YM 2000D? Comparing the different comparisons (all 4 WD) from a couple different sources: HP Wgt Sold 2000BD 4 WD 22 2...

Does anybody know of a good place to find 15" front wheels for my YM 2000?

How do you bleed the injectors on a yanmar 2000? A friend of mine drained his fuel system and replaced the filter then started it up and it ran fine for a couple minutes then shut off and wont crank now. It was running fine before he drained the fuel. Is there a bleeder valve on it somewhere?

Let me start by saying I don't know much about this sort of stuff. My husband is going to build an arena drag for me (much to his dismay). This is a pretty fancy rig with hydraulics that lift the frame. Here is a link to the drag. If you click on some of the small pics below the big one, you can...

[URL="http://www.abiequine.com/products/arena_drags/kiser_dragmaster.php[/URL] Okay, my question is, is my Yanmar 2000 capable of doing this? Right now, I have a brushhog and a mower that I use but I don't think it has any other hydraulics besides the stuff that moves the arms in the back up...

rear end won't lock when I step on the lever.

I've had my 2000 a little over a year now and never had any problems. it has always smoked some but not to bad. anyway I lent it to a friend and he called to say it wouldn't start. it had been working great he turned it off and went inside for an hour, came back out and it turns over but won't...

Need Help Please I have a 2000BD . For some reason the lift seems to be leaking down. At TIME NOT ALWAYS. I put a 4' bush hog on it today that is when i seem to notice it. When operating the lift and going to reaise close to the max I can hear a "hising sound under the seat" I can lower a...

Hi, New to forum and Yanmar Tractors.I just bought a ym2000 and I have a ym1400 tiller My problem is my hydr lift stopped working and from reading the forums something was said about cleaning the hydr filter,can anyone tell me where this is located on the ym 2000? I would really be grateful for...

LOOKING TO MOVE UP FROM MY 6.00X14 FT AND 9.5X24 ON THE REAR. WOULD LIKE TO MOVE UP 2" IN TIRE SIZE . SOMTHING LIKE 6.00X16 ON FT AND 11.5X24 ON REAR. ANY IDEALS.POSSIBLE LOOKING FOR EXTRA RIMS

Thanks for the web forum.... learned a lot so far, mostly to be cautious of my new tool. Under the back axle there looks to be a place to insert a trailer hitch post. It is basically round, not square. Any body know if this is for a hitch and were can I get one. Don't have the tools to make...

OK GUYS NEW AT THIS. I NOTICED THAT I HAVE FLUID RUNNING DOWN ON THE FT INSIDE WHEEL.LOOKS LIKE IT IS COMING OUT FROM THE MOST OUTER SEAL NEXT TO THE WHEEL. CAN SOMEONE HELP WITH TEAR DOWN. AND ALSO IS THERE AN ONLINE SERVICE MANUEL TO REFER TO.......THANKS TIM

I have a YM2000 and the battery will not keep a charge. I can jump start and it works fine. How do I test the Generator. I have a volt meter. On the back of the generator, it has the Letters - E A and there is a plug that has the lettes N & F. What do these mean and how do I test it ? I...

Yanmar 2000 New Owner with 5\' Bush Hog Hello Guys, I'm a planing on using a 5' Bush Hog with my tractor. Does any one feel this Bush Hog is to large for my Yanmar 2000? I have 8 gears low and high and on my PTO I have 1,2&3. What would be the recomemmend Gear I should use when cutting weeds...

What would be the best size box blade for a Yanmar 2000? Primary use will be for gravel driveway maintenance. Whatever size I buy, it will be the heaviest duty I can find. I guess my main question is; Would a heavy duty 5' box blade be too heavy for this size tractor or should I get a 4'? I...

i am changing the trans/hyd oil and the manual says to use jd 303 and i dont have a john deere store around.what is another name brand i can use.thanks rac

New to forum. Considering the purchase of the tractor in the attached photo. Seller states Yanmar YM 2000 22HP $2800. Has 840hours. Location is south Louisiana. Is this a gray tractor? Thank you for your help. Please post any questions. Yanmar 2000? photo

Hello I am new owner of a YM 2000. I live in North Ga about 80 miles from Atlanta. Can some one tell me if Rotella 15-40 would be a good choice for motor oil for my tractor? Thanks.

Had a lady call me last night looking for parts for her Yanmar YM2000. She said "it's the electric one". (see the attachment). I some how don’t think this rolled off Yanmar's factory floor. Looks nice….. definitely based on a Yanmar. Any Idea where this thing came from? I found some mention of...

does anyone know where I can find a rollover bar for my ym 2000

Hi, Just purchased a YM2000 and used it today to bush hog the pasture. Just normal grassy areas, nothing too tall. Had tractor in 3rd gear, high and PTO in 2nd (I know now it is supposed to be in 1st!) and am using a 4 ft bush hog. Was going along just fine, and the oil light came on and...

would like the cooling capacity of yanmar 2000, thanks

new tractor owner, have a yanmar 2ooo, changing transmission/hydrolic fluid, their is a small bolt forward of the bolt to drain the transmission. having trouble puting filter in by that small bolt without tearing the screen. can someone tell me if that small bolt can be removed and if that holds...