yanmar 2420d

I have a yanmar 2420D that currently has 11.2-24 tires on the rear and 7-14 tires on the front. When doing a search I read that my tractor should have 6-14s on the front instead of the 7-14s (this is how I got it) I just ordered 7-14 since that is on there now and wanted to know it that's okay...

Hello, I have a yanmar 2420D that currently has 11.2-24 tires on the rear and 7-14 tires on the front. When doing a search I read that my tractor should have 6-14s on the front instead of the 7-14s (this is how I got it) I just ordered 7-14 since that is on there now and wanted to know it...

Just purchased a Yanmar 2420D (power steering) and after 10 hours discovered hydraulic fluid coming out of the top of the steering column. Took it apart and there appears to be a leaking seal at the base of the steering shaft, where it drops into the steering unit. None of the documentation I...

I have a Yanmar 2420D with Koyker 110 Loader The Tractor was delivered to my property , unloaded and parked in my Barn and Loader lowered I wasnt around at the time only the maintenance man who assisted the delivery by unlocking the barn door The problem I am having I can not raise the...

I have a question about what to expect pay for a used tractor. I found a 1985 2420D parked nearby with Koker 160 FEL and Dual backhoe. The tractor has 548 hours on a 4 digit clock. I saw no signs of leaks, engine and transmission oil looked good. Started up and ran fine with no smoke when...

Does anyone have info on what RPM I need to run my engine and what speed my PTO should be set to operate: a bush hog a tiller an auger I don't know if that info is in the operator's manual or not, since I don't have one.

I have my eye on a YanMar 2420D that is semi-local. How easy is it to get parts for these? Anything I need to look for / know about before I take the leap? I just want to make sure that I get something that I can easily maintain and not have to search the ends of the earth to find simple parts...

I have a 2420D which I've had for over 2 years. It has been a great machine. I was recently moving the tractor, with a box blade attached, so I could change out the box blade for a 3-point backhoe, and the boxblade went all the way up (topped-out) and I cannot lower it. What do I need to look...