zetor 3320

Stuck Tractor and pulled the Hydraulic LINE broke going to pump from Hydraulic Tank,,,,,repaired the line low pressure and filled the tank with Hydraulic oil and now will not build up any pressure for front end Lowder,,,NO Hydraulic OIL IS MOVING

After using my 3320 for a few small tasks today, during which braking was normal, I attached a bush hog, which uses a single hydraulic to change the deck height. Sometime at or after attaching the bush hog, the brakes becamse seized. After mowing for a while, I realized the tractor would not...

I am planning to replace a brake master cylinder on my Zetor 3320 and have two questions: I've tried a google search and am coming up with parts that look different depending on the vendor. Could someone help me find a resource to determine exactly the master cylinder I'll need? Second, I'm new...

I am new to working on tractors and am dealing with a brake problem on my recently obtained Zetor 3320. Brief background: my clutch stopped working, which lead me to park the tractor. I discovered that the brakes and clutch use the same reservoir, which was completely empty, and after refilling...

I have a 2008 Deere 3320 with a 7iron deck S/N M00072D340386, and my deck gearbox froze up today. Also the deck itself is still serviceable but getting in rough condition. I found someone selling a brand new 2008 7iron deck S/N M00072C340298 that was originally off a Deere 4720. The hanging...

Hello, I have a 3320 Compact Tractor and the rear axle seal is leaking. I ordered the parts and are on the way to me. I am looking for someone who has done this before. If I take the four bolts out at the end, will the axle just come out? Is there a snap ring that hold it in, and I need to...

I have read through a lot of old postings about this issue but I can't find an answer for my situation. My 3320 (1650hrs) has a noticeable extra load on the motor when the 3-point arms reach the full up position, I can move the lever down slightly and the excessive load goes away. I have...

Couple of problems with my rockshaft arms on a 3320 - one is that the original functionality of setting the rockshaft height with the rockshaft control lever is totally gone - it used to be that setting lever to 1 set the height to whatever, setting the lever to 2 would be higher than 1...

Needed to take down a large White Oak to make room for our camper and open up the woods a little. Tree measured 34-37" in diameter and will end up making a lot of firewood and few pieces of woodworking projects. This was as far as it would lift the log, and needed 4-wheel drive as the back...

We purchased a used 3320 with low hours a few months ago and all has been well. We had about 25" of snow to clean up after two storms that rolled through back to back last week. During cleanup I noticed the front blade would stop working, so I would turn on the rear-hydraulic switch again and it...

Hi everyone, I'm at a bit of a loss here. I have a 2010 JD 3320 (eHydro w/Cab) with a 300CX loader that I'm trying to add a rear remote to for chute control of my PTO snowblower. I ordered the LVB24845 3RD SCV kit but it looks like it won't work with my machine. The installation instructions...

Hey everyone, I just joined this site about a week ago. I am in the process of trading in a 1026R on a 3320. I was wanting any opinions on the price. Here is how it is: 2012 3320 with power reverser ( left over model) 72" mid mount mower R4 tires loaded with rimguard Air ride seat Two forward...

Waiting to close on 25 acres and will soon be looking to purchase a tractor. Trying to decide between the models above. I sold a 4310 that I had a few years ago. It did everything I needed with only a few times wishing that I had a little extra HP. Now the 3320 is the replacement for the 4310...

Could someone tell me where the right master cylinder is located or how toget to it. The pedal pushes down but does nothing, the left side will stop the left tire. So I am guessing it needs a new master cylinder on the right side. Any help is appreciated.

Hey guys, I know this question has been asked before, but I am hoping for some advise. I am currently an open station red tractor owner looking to switch to a Green Cab Model. My main uses for the tractor are snow removal, road maintenance, Brush hog mowing (6 acres a couple times a year) and...

first time tractor buyer, looking to make sure that the asking price is reasonable? they are asking 25900 for a 2009 jd 3320 with turf tires cx300 loader. it comes with a 485 bachoe with 175 hours on the machine over all. i need some help have till mid to late january to make a decision and the...

Greetings, My brother in law bought this new JD 3320 compact tractor in August of 2006 to work on his new home in 2008, sadly he suffered a massive heart attack at 49, and died. My sister has decided to sell this tractor and asked me to find out what a fair price is. JD 3320 Details: S/N...

:confused2: With the help of my last post ( lot great advise ), I have decided between the JD 3320 and 4105. I thought I was set on a 4105 ( more hp why not) but spoke with another mechanic who stated the 3320 has a much heavier frame then the 4105. Because of this the 3320 can take the 485...

I'm trading in my good ole 1974 JD 2030 for a compact tractor. I've looked at other makes, but decided to stick with JD for a host of reasons - dealer relationship among them. I'm looking at a 3038E vs 3320. I like the 3320 for its weight, although it has less HP. And it's substantially...

Any issues with turbos on the 3520? I always want more power whether I use it or not. I will have to order the 3520 and the 3320 is in stock. I want the 300cx loader , 2 remotes, vertical stack, top & tilt. These are 2012 I could save $1000 on a 3320 built June of 2010 new old stock, but it is...

A neighbor is looking to buy a tractor about my size, I have a 3720. He wants a loader, backhoe and 6 foot finish mower. He has a quote from Kubota on the L3800 at about $26,000. I am confused on what backhoe I should configure for the 3320. Even taking 15% off (which is what I got when I...

See link for pics of new 3320 and other equipment I have been blessed with. www.photobucket.com/deere3320

Hi, I came across a 3320 for sale, it is a 2010 with 56 hours, 300CX loader and 375 backhoe. In excellent condition and garaged. I can buy this for $21,000. I'm thinking this is too good a deal to pass up, even though I have been happy with my 4110. Just looking for a little advice from my...

I understand these are completly different tractors and I have researched both extensively. I am in the market to upgrade from my 2305. My use would be a mix of loader functions (mainly snow removal), some pto use (rotary mower and rototilling) and limited one bottom plowing (an acre or less)...

I am planning on mounting a backhoe to my 3320 Im wondering if anyone has made their own rockshaft assist brackets? If so do you have drawings you'd be willing to share maybe even a dxf? If not could someone tell me what thickness the brackets are made of and I'll design a set. or if...

I am working on a 2005? (give or take a year) 3320. Was going to add some rear work lights. Went to look for the purple and black wires that are usually around the rops base, and cant find them. I have looked everywhere on the tractor. I have done a 2008 3320, a 2009 2520, and a 2005 4720...

having trouble making a decision. Used 4510 w/ about 800 hours for $15400, or new 3320 for $19200. Both have loaders, power reverser & 4wd, 4510 has the mid mount hydraulics but I doubt if I'd use it. We have 70 acres but 30 of it is heavily wooded & some is creek bottom, and we won't...

basically I have 3 choices from the dealer. 3520 w/ hydro for 21750, 3320 w/ hyrdo for 20275, or w/ reverser for about $800 less. I am actually considering the 3520 but is it worth the $1500 just for the extra 5hp? I will be running mainly a 5' brush hog and a 5' box blade, and a pto tiller...

First I want to thank the people who helped me in my decisions and options on this tractor. It made a big difference and I have a tractor better suited to my needs due to their help. Roy, Steve, AK, Dave, etc. Thank you. The thumb is a gas! love the 3 speed box with the hydro and the power over...

First off let me say up front that my seat time in tractors is about 30 minutes north of zero. However, I'm in the need of a tractor to take care of a 7 acres that will be my new home site. 5 of the 7 acres are older pasture that will be mow-able lawn at some point and the rest is wooded. The...

Does anyone know what a JD 3320 was selleing for in 2007-early 2008? I have a chance to buy a new 2007 JD 3320 w/300cx loader power reverser transmission that has been on a dealers lot since 2008. I would like to get an idea of the price from that time frame to see if I'm acually being offered...

3320 e-hydro R-4's loaded with RimGuard Less mid PTO 1 rear remote 300CX Loader Hood Guard 61 inch HD bucket $22,300.00 ( without PA sales tax included ) Is this a good price or should I check other dealers ?

I posted this over in the deere forum but got no replies. I have a deere 3320 hydro and had a small issue while harley raking a customers lot. I was raking and lifted on the rockshaft control lever(3pt control handle) and no lifting occured. I got off the tractor and fiddle around with a few...

Why won't my the rockshaft move up or down? The tractor has a 375 hoe installed when I bought. Does the rock shaft not work with hoe installed. opened drop speed valve all the way at bottom of seat. Nothing happens when I move the move the lift/lower lever. No hydraulics noise no nthing...

I have a couple Peterson halogen 3x 5 work lights to mount on my ROPS Wht color and where are the terminals the factory kit would plug to? Any online wiring diagrams for these tractors?

Does anyone know the part number for the rear work light kit on an open station 3320? I looked it up in the parts catalog, but it says the number is invalid. The number it gives me is LVB25547.

Just curious about price on a JD 3320 tractor with FEL 300c. Tractor has about 50-60 hours and is only 1 year old. Light use brush hog and moving dirt, great condition. Is $10k good, high, low??? Thanks,

Great site dont post much,so here goes looking at a 06 JD 3320 150 hrs 300cx, 6' rake,sun shade not sure on 50 hrs service,no mid pto, asking 19,300 too hi or good?? rember this is in Maine your talking highest pricing for tractors thanks

I need help on deciding between 2 tractors. Both are John Deere and both from dealers. A 4410 with 1100 hours and Hydro transmission for $12,500 being sold by a Kubota dealer 2 hours from me or a 3320 with 500 hours for $14,500 sold by a JD dealer in my town with the HydroE Transmission. The...

well I'm enjoying the pursuit of a new tractor. I own a b7100 with FEL that has been bulletproof for years. Kubota dealer is close to me but either their machines sell themselves with no help from the sales dept. or they dont think the customer is #1. Anyway, I was looking at a L2800/3400 but...

Could someone tell me what bulbs the rear work light kit use? I have ordered 2 of the rear light kits p/n LVB 25547 - however, I need to know what type of bulbs they use.. if anyone with the rear light kit could "shed some light" :D on this I would greatly appreciate it. reason being.. I am...

Does anyone run 2 rear work lights on their 3320. I know the part number is LVB25547 but the dealer says the wiring can only support the wattage of 2 front and 1 rear. If this is the case.. what is the consensus on changing the rear lights to LED's - that would drop the draw and make things OK...

Looking for fact based opinions/experience on the merits of both units. The 3203 loks like a nice unit, what you give up, doesn't look like it is important to me. But the powertrain specs look very similar to a 3120, which I've read here is underpowered. I'll be using the unit for rotary...

These three tractors are within 3hp of my target of 30HP. They are so similar I can't determine the differences. They are all the same size, same 3 cy YM engine, etc. Can someone enlighten me? Why would JD need 3 so close to each other? Kind of like the Chevy Tahoe vs GM Yukon...same truck...

Hi everyone, hoping I can get some help understanding why the price I'm getting quoted is so much higher than some I've seen here on TBN. JD 3320 CUT - eHydro - loaded R4s (beet juice) - dual mid and single rear SCVs - iMatch - air seat - forward lighting kit - warning light brush guards - rear...

I'm in the process of evaluating purchase of either a JD 3320 or a Kubota L3240 with FEL. The L3240 has the edge in HP (34 vs. 32.5) and is ~200 lb heavier. However the 3320 has more gears (12f/12r vs. 12f/8r), larger fuel capy, wet vs. dry clutch, and more hyd pump capy. Use will be...

3320 hydro, 300cx loader, 447 backhoe, R-4s loaded with juice, set up and delivered... 25,900 Does that sound good for the Pacific northwest area? Thanks.

Greetings all. I am new to the forum and this is my first post. I would appreciate your advice. I live on 50 acres and primarily use an old 2040 to boxblade a 1 mile long gravel drive, bushog around 20 acres, maintain trails and plant food plots. I've decided to go with a new tractor. My dealer...

Guys, We finally closed the deal on the purchase of 10.5 acres that is mostly fairly rough pasture, with a couple of gullies that have trees in and around them. The entire thing is gently sloping (less than 10 degrees) with a few areas where it was terraced, and the "berms" from the terracing...

About two months ago I reported that the rockshaft on my 3320 suddenly stopped working at 66 hours. I had lowered the 3ph with ballast box to the ground, shut down for a few minutes and then on restart the 3ph would not lift. No response at all. After a few min of fiddling/shutting on/off the...

Hello everyone, I am new to this and wish for any help in selecting the tractor. I just purchased a 17 acre piece of property which I intend to put up a fence, till the soil for a large size garden and finish mow. I was looking at the Kubota L3130 with a 723 loader for $19500. the same dealer...

Well the first big project is getting towards completion! I was removing some stumps behind the house last fall, so I might turn the area into a yards for my boy to play in. I had a little stream that ran back there. Ran pretty good when it rained... actually just about made the road to the...

It has been a long time since I have posted but I'm finally ready to make the purchase. I have narrowed it down to the 3320. I would appreciate your feedback on the following prices. Unless I'm calculating something wrong, this seems to be around 10% off of list or more. These are both...

I have 66 hours on the 3320 and this is my 1st problem with the machine. I set out to do some driveway maintenance after a minor washout. I drove down the driveway get the landscape rake, hooked it up, raised the rockshaft, and drove back up the hill where I found that the rockshaft no longer...

hello, im looking at buying a 3120 or 3320 wit FEL price im getign is about 17.9 to 18.3k how are these prices. seem a little high complaired to kub tactors anyhelp would be nice thanks and any pros cons also! Thanks Aaron

Hi, I'm also a newby whose appetite grew according to the menu I saw before me. I originally wanted a Kubota BX24 and then a B3030 BUT but just drove and worked a JD3320. Now I want IT. The dealer quoted $26,500 for: e-hydro 3320 with auto cruise, dual mid valve, power beyond, 300CX loader...

First off I'd like to thank everyone for the wealth of information on this site. I'm looking for some advice on a quote I've been given...does this sound like a good deal? 3120 Tractor Open Station eHydro Mid PTO 25x8.5-14 R4 Tires Dual Mid & Single Rear SCV iMatch Quick Hitch Category 1...

My Situation - I have 7.5 acres, 3.5 will be finish mow (relatively flat and unobstructed), and about another 3 will be rough cut once or twice a year. (I currently have a 4' brush hog to use) 500' driveway to clear in the winter. Land has not been tilled in about 5 years Will need tractor to...

I've been reading TBN for about 6-8 months, what a great site. After talking it over with my wife, I've gotten the green light to go ahead and start pricing some tractors. I'm looking at the Deere 3120/3320 with e-hydro, a FEL, and a "brush hog" to tame some of this wilderness of mine. Some...

Well I have my choices narrowed down to the JD 3320 and the Kubota 3130. The JD would have the 300cx loader. The Kubota would have the LA723 loader. Both dealers are close and both are good. Either one will be hydrostatic. Price wise the Deere is $2000.00 cheaper. I got quoted $22,000 for the...

Well, unfortunately I was in a hurry and didn’t take the time to take more pictures. This one gives you some insight into the process of loading an old car onto a trailer. A friend wanted to have this 1982 diesel Audi removed from behind his workshop. It has been sitting in mud and surrounded...

Hi all, this is my first post. Im located in Missouri,and looking at a 3320 w/ehydro and 300cx loader. One dealer quoted $19600.00, is this a fair price? Also, what would be a good price on the 448BH? Im wondering whether to get the BH while J.D. has the 0% for 36 mnths. or do they run the 0% A LOT?

Spoke to my dealer today regarding a quote on a 3320. 3320 eHydro, MidPTO, R4's - $18,500 300CX Loader, 73" HD bucket - $3700 LX6 - $1500 Wants to give me $8900 for my 2210, FEL, 54"mmm, w/47 hours, 1 year old, w/1 year left on the warranty. I thought he could do better. He said he'd sharpen...

I will eventually figure out what tractor I am going to buy, but only if you help me spend my money. Local dealer has 4310 with 15 hours on lot being sold as new 4310 ePower 14890.00 300X loader 2892.50 To order a 3320 Hydro 3320 Hydro 16300.00 300CX loader 3300.00 Tractors are...

I can buy a used Zetor 3320 tractor for $6,000.00 with 600 hours on it. At the present time, I do not know the year of it. These tractors were made from 1994 to 2000. This tractor looks real nice, and has nice tires on it. I know nothing about a Zetor tractor. Are Zetor tractors a good, or bad...