0 or 00# grease sources?

[Soundguy]

dang...

soundguy

 

[GREENGUY30]

The cornhead grease is still available in most JD dealers and they offer them in a 10 tube package. Also spindle grease meets the same 00 viscosity rating

 

[Soundguy]

just found snapper dealers carry it and so does stens grease.. etc.

 

[Bradtina11]

I have replaced the multiluber on my 348 jd baler with grease fittings. How can I get the multiluber grease into the fittings since it doesn't come in a grease tube?

 

[Xfaxman]

:thumbsup: to TractorByNet!

Try removing the tube and filling the grease gun with the multiluber grease.

That is the way it was done back before grease came in tubes.

 

[Soundguy]

cornhead grease comes in tube...

 

[MHarryE]

cornhead grease comes in tube...

john Deere and AGCO both use type 0 grease in their corn head gearboxes, from a tube.

 

[Bradtina11]

:thumbsup: to TractorByNet!

Try removing the tube and filling the grease gun with the multiluber grease.

That is the way it was done back before grease came in tubes.

i poured the multiluber grease into the grease gun and it worked great--thanks for the reply!!!!!!!!!!

 

[Xfaxman]

i poured the multiluber grease into the grease gun and it worked great--thanks for the reply!!!!!!!!!!

You are welcome.

Now you need the LocknLube on a hose to make it easier to grease it.



Check this thread: http://www.tractorbynet.com/forums/oil-fuel-lubricants/304889-locknlube-cupler-grease-gun.html

And the reviews: http://www.tractorbynet.com/forums/owning-operating/307933-review-locknlube-grease-gun-coupler.html