1 Major RTV900 Problem

[tractor127]

Ok I work at a dealer so im not making it up. The problem may just be Southwest related to the desert here in AZ.

But we have been having a lot of failer's with the spider bearing in the rear axles. The failures are mostly do to the bearing not being grease-able. If it could be greased we wouldn't have any problems with it. We have done 4 RTV's already all with this problem.

They seem to go out at any time. We had a couple around 1200 hours and the other 1 was only at 380 hours. But I think it may be caused more from the dryness out here and all the dust.

Has anyone else had this problem?

 

[riptides]

What are the symptoms? Can you describe what the failure looks or sounds like?

Thanks.
-Mike Z.

 

[kubota men]

dealer replaced mine at 200 hr only sign was a occasional squeak comes and goes cost me 165.00 if it goes out again i will try to cross it over to a greasable one.

 

[MessickFarmEqu]

We sell 50-60 a year and I can't say I've noticed any chronic problems with that. We are also in the north east.

 

[tractor127]

It may be a southwest problem then. Problably do to all the dust and heat.

 

[milkman]

What is a spider bearing and where is it in the rear axle, I know what a spider gear is, never heard of a spider bearing, is it like a universal joint in a driveshaft only located in the axle?

 

[riptides]

So how about some answers to the questions people have ask of you?
tractor127

-Mike Z.