10 Hour Oil/Hydro Change
- Thread starter cager
- Start date
- Views: 2498
My 2185 is set up in this manner also and it's a 96 year model (I think). The included hose was useless. I've always been able to park it with the front left tilted slightly lower and let it go. With a large drain pan and the help of a piece of cardboard the mess isn't too bad. Just be sure to have a few paper towels to wipe down the section of frame next to the drain plug. This was an engineering after-thought that should have been corrected long ago.
JTKub
Veteran Member
</font><font color="blue" class="small">( Has anyone tried to extend the drain tube with more pipe; permanently bringing it to the end of the frame?
It's location is /forums/images/graemlins/crazy.gif )</font>
Nope. You cant on the 2544 unless you want to lift the engine to remove and replace the factory installed oil drain valve. The best idea i've seen yet utilizing the existing drain, is to buy a section of super flexible surgical tubing (home depot or lowes). That type of tubing flexes and bends without pinching off. Someone else cut a hole thru the frame crossmember right under the drain to give the hose an easy route.
Joel
It's location is /forums/images/graemlins/crazy.gif )</font>
Nope. You cant on the 2544 unless you want to lift the engine to remove and replace the factory installed oil drain valve. The best idea i've seen yet utilizing the existing drain, is to buy a section of super flexible surgical tubing (home depot or lowes). That type of tubing flexes and bends without pinching off. Someone else cut a hole thru the frame crossmember right under the drain to give the hose an easy route.
Joel
tiny1
New member
On the '06, Cub added a 90 degree pipe bend and now the oil drain run parallel with the frame. It looks like you would have room to attach the hose to drain the old oil.
</font><font color="blue" class="small">( On the '06, Cub added a 90 degree pipe bend and now the oil drain run parallel with the frame. It looks like you would have room to attach the hose to drain the old oil.
)</font>
That's the way my 3240 is set up.......much better. You can actually use the supplied plastic hose.
)</font>
That's the way my 3240 is set up.......much better. You can actually use the supplied plastic hose.
JTKub
Veteran Member
</font><font color="blue" class="small">( On the '06, Cub added a 90 degree pipe bend and now the oil drain run parallel with the frame. It looks like you would have room to attach the hose to drain the old oil. )</font>
That's a definate plus. Leaving it the way they did for 2005 was rediculous.
Joel
That's a definate plus. Leaving it the way they did for 2005 was rediculous.
Joel