10 hours greasing help

   / 10 hours greasing help #1  

dfortier

New member
Joined
Feb 15, 2013
Messages
23
Location
CT
Tractor
BX1870, Bolens 1400 eliminator
Hello all,
Well i finally got my 1870 last saturday, and ive been using (and loving) it every minute i can. So i hit 10 hours of use last night on the loader and im looking for the proper grease. However there is soooooo many differant ones, I figured id ask here and hope you all can point me in the right direction. Ideally i would like to purchase one brand/type that i can use on everything, that way there is no confusion later on. So i have the FEL, MMM and grass catcher, would the link below work on all of them? If possible i would rather have a synthetic since they work better, but this one doesnt say if it is.

Peak Extreme Pressure Moly Grease 14 oz. Cartridge | Product Details | Pep Boys

thanks for the help
 
   / 10 hours greasing help #2  
My short answer is that it really doesn't matter which type of grease you use as long as you use it. :)
 
   / 10 hours greasing help #4  
I buy the middle-if-the-road grease from Tractor Supply and have been very happy. I also bought a pneumatic grease gun, which makes the job much easier.
 
   / 10 hours greasing help #5  
I agree with all of the above. If you have a compressor buy the air operated grease gun. If you don't own a compressor, buy one. They are cheap and one of my most valuable and used tool. I actually have three and always look when I see one on sale.:D
Tractor Supply and Farm World, etc will have like 10 tubes for $10 several times thru out the year. If your actually going to stay with your every 10 hour schedule then any grease will work.
 
   / 10 hours greasing help #6  
I've been using grease that my dad bought years ago...
It is still good and serviceable...
For a loader and other what I consider low stress operations it works fine...
I even use it in my RFM with no ill affects...
I'm just about out now...
I guess that I've gone though a couple of cases that he had stored up over the last 4 ore 5 years...
 
   / 10 hours greasing help #7  
Pretty much in agreement with everyone else, I just go to the pace we get our diesel a farm bulk supplier and tell them to give me a case of grease and then I am set for a while.
 
   / 10 hours greasing help #8  
To grease or not to grease, that is the question. grease
 
   / 10 hours greasing help
  • Thread Starter
#9  
Hi all,
Thanks for the quick replies. the local tractor supply is almost an hour away, that's why I was looking at pepboys. I do have a nice compress so ill grab a pneumatic gun and what ever EP synthetic grease they have in stock.
 
   / 10 hours greasing help #10  
Kubota's "Every 10 HR" greasing regiment is quite a burden. I hate getting up in the middle of the night to grease on the 10 HR mark. I've been splitting up the chore with my wife lately, so we alternate and it works out better.

Wrooster
 

Tractor & Equipment Auctions

500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
Unverferth Roadrunner 536 Head Cart (A59814)
Unverferth...
500 Gallon Fuel Tank with Pump (A55853)
500 Gallon Fuel...
Kubota B2301 (A53317)
Kubota B2301 (A53317)
3ft Metal 5-Point Star Art (A55853)
3ft Metal 5-Point...
HYDRAULIC THUMB CLAMP FOR MINI EXCAVATOR (A58214)
HYDRAULIC THUMB...
 
Top