1025r scv

   / 1025r scv #1  

Madarcher427

New member
Joined
Jul 29, 2014
Messages
4
Location
Michigan
Tractor
1025r
I cannot get my quick connects to connect. I ve the scv lever several times & still cannot get them in. Any suggestions?
 
   / 1025r scv #2  
Yes, very likely there has been some pressure built up in the lines and you cannot push hard enough to move that tip button back in the male end.

Wrap with a rag, and press or tap the tip against something hard, like steel, and the oil will squirt out (so be aware of that sudden squirt of oil).

That or loosen a connection in the line of the attachment to drain some oil and relieve the pressure.

This happens when the lines warm up in the sun, and the oil expands building some pressure. Doesn't seem to take much either.
 

Tractor & Equipment Auctions

500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2025 Kivel Fork and Frame Mini Skid Steer Attachment (A56857)
2025 Kivel Fork...
2017 FORD F-550 SERVICE TRUCK (A58214)
2017 FORD F-550...
2018 Dodge Ram 3500 (A57148)
2018 Dodge Ram...
1989 Ford LT9000 Log Truck, VIN # 1FDZU90T2KVA25137 (A57453)
1989 Ford LT9000...
LOT: (17 approx. ) Rolls of Chain Link Fence (LENGTH UNKNOWN) (A59076)
LOT: (17 approx. )...
 
Top