1025r scv

   / 1025r scv #1  

Madarcher427

New member
Joined
Jul 29, 2014
Messages
4
Location
Michigan
Tractor
1025r
I cannot get my quick connects to connect. I ve the scv lever several times & still cannot get them in. Any suggestions?
 
   / 1025r scv #2  
Yes, very likely there has been some pressure built up in the lines and you cannot push hard enough to move that tip button back in the male end.

Wrap with a rag, and press or tap the tip against something hard, like steel, and the oil will squirt out (so be aware of that sudden squirt of oil).

That or loosen a connection in the line of the attachment to drain some oil and relieve the pressure.

This happens when the lines warm up in the sun, and the oil expands building some pressure. Doesn't seem to take much either.
 

Tractor & Equipment Auctions

HOBBS 48FT FLOAT (A55745)
HOBBS 48FT FLOAT...
NEW HOLLAND T4.75 TRACTOR (A52707)
NEW HOLLAND T4.75...
2019 Ford F-550 4x4 DurALift DTAXS39 39ft. Bucket Truck (A55973)
2019 Ford F-550...
Kubota BX2680 Sub-Compact Tractor  4WD, 218 Hours (A55301)
Kubota BX2680...
2009 International 7400 T/A VacCon V311LHA Combination Sewer Jetter Vacuum Truck (A56858)
2009 International...
2013 Peterbilt 367 QMC 7060S 35 Ton Tri Axle All-Terrain Crane Truck (A55973)
2013 Peterbilt 367...
 
Top