1070 will not start

   / 1070 will not start #11  
970痴 are 4 cylinder too
 

Attachments

  • E39B101E-C806-4649-84DB-6E672A597E33.png
    E39B101E-C806-4649-84DB-6E672A597E33.png
    570.1 KB · Views: 116
   / 1070 will not start
  • Thread Starter
#12  
No. 970 is 3 cylinder. 1070 is 4 cylinder on same framework. My 1070 did this problem activity. I replaced the two contact plates in the solenoid [ ebay ] and it returned to normal service, although I do recommend cleaning both ends of each battery cable. Search for Denso starter contact rebuild kit. Under $20.



Cannoncreek here, the guy with the original no-start problem. It WAS the ground. After a few hours of struggle trying to remove old ground bolt, finally drilled a new hole next to it and put in another ground cable. Two old guys in their 70’s thank you!! We are back in mowing mode.
 
   / 1070 will not start #13  
Because mine gets wet in snow banks, I coated the cable bolt with blob of old grease. After fording irrigation ditches and plowing snow, no problems after the repair.
Chris
 

Tractor & Equipment Auctions

2017 International DuraStar 4300 26FT Box Truck (A51692)
2017 International...
2008 FREIGHTLINER M2 106 (A53843)
2008 FREIGHTLINER...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A52377)
2003 Big Tex 10PI...
2025 IR UNUSED Hydraulic Breaker (A53117)
2025 IR UNUSED...
2015 Hooper T/A Trailer w/Mounted Foaming System (A53117)
2015 Hooper T/A...
Frontier 60" Grapple (A50123)
Frontier 60"...
 
Top