oklahomafarmer
New member
- Joined
- Mar 29, 2014
- Messages
- 3
- Location
- Harrah, Oklahoma
- Tractor
- John deere 4430, 4440 & International 1086
I have a 1086 that was sitting for about 4-6 years but it had a recent overhaul (less than 100 hours). I ran it for probably 20+ hours. I replaced the valve cover gasket and put a new turbo on it and when I started it up after about 30 minutes oil/water mixture was coming out of the blow by tube. I have taken the pan off and pressurized the radiator and cannot find a leak there. So I'm assuming it is not a liner with a hole in it. Anyone know what it could be or what to check?
Any info would be greatly appreciated! Thanks
Any info would be greatly appreciated! Thanks