Backhoe 110 TLB Backhoe Hose Clamps and Brackets on Dipper Stick for Thumb/Auxs.

[V1BuzzBomb]

I bought my machine used equipped with extra valve and thumb. I expect factory or dealer installed on thumb. Upon looking through Deere illustrations to order new hoses for bucket cylinder, I stumbled upon illustration and parts for hose mounting. Upon receipt years ago, I had the default clamps for the bucket cylinder hoses. The auxiliary hoses were simply wire tied to them. So, I bought the parts for the factory double clamp arrangement. It appears the mount boss on the dipper stick is common. For auxiliaries, there is a second clamp added diagonally. To accommodate this, there is a four hole piggy back bracket added, two of the holes mount to the original bosses on the dipper stick.

I'm seeking images from anyone who has this arrangement factory installed.

 

[V1BuzzBomb]

Added double piggy back clamps yesterday. The John Deere Parts diagram suggested a different orientation. This arrangement made more sense and worked best for me.
New hoses and anti-chafe sheathing added at the same time.

 

[V1BuzzBomb]

I ran auxiliary hose through prior owner added welded metal hose guide. With dipper stick all the way out, result is a tighter than OEM loop on lower auxiliary hose. I'm undecided whether to leave as is, run hose outside guide or remove it.

 

[DocDryden]

Here's a few pic