Loader 110TL leveling

   / 110TL leveling #1  

brs077

New member
Joined
May 11, 2015
Messages
8
Location
Cobleskill
Tractor
NH WM 40
I've got a Workmaster 40 with the 110TL loader. I'm trying to find out if there is any adjustments to the cylinders to level the arms. When I put a 8' pusher on it, the right side (as seen from behind the wheel) hits the ground and the left side is still 2-3" high. I can use hydraulic pressure to make the other side contact the ground of course, but that slightly lifts the right front wheel and makes the right side dig into the stone driveway more than the left, causing it to scalp slightly.
 
   / 110TL leveling #2  
My first thought is something is bent that isn't as noticeable when the bucket is on or on the pusher or mount. My second thought is to check tire pressures all the way around the tractor.
 
Last edited:
   / 110TL leveling #3  
Try adding air to the right rear or deflate the left rear some
 
   / 110TL leveling #4  
You need to park the tractor on a level surface. Use a bubble level to start checking to see what is tilted. is it possible that the pusher is not welded perfectly square?
 

Tractor & Equipment Auctions

2021 FORD F450 TOW TRUCK (A50505)
2021 FORD F450 TOW...
2002 NEW HOLLAND 4X4 TN75S TRACTOR (A51243)
2002 NEW HOLLAND...
2014 VOLVO VHD DAYCAB (A50854)
2014 VOLVO VHD...
2014 STEPHENS 200BBL TANKER TRAILER (A50854)
2014 STEPHENS...
2007 WESTERN STAR 4900 (A50854)
2007 WESTERN STAR...
2015 CATERPILLAR 289D SKID STEER (A51242)
2015 CATERPILLAR...
 
Top