Loader 110TL leveling

[brs077]

I've got a Workmaster 40 with the 110TL loader. I'm trying to find out if there is any adjustments to the cylinders to level the arms. When I put a 8' pusher on it, the right side (as seen from behind the wheel) hits the ground and the left side is still 2-3" high. I can use hydraulic pressure to make the other side contact the ground of course, but that slightly lifts the right front wheel and makes the right side dig into the stone driveway more than the left, causing it to scalp slightly.

 

[3 Horse Ranch]

My first thought is something is bent that isn't as noticeable when the bucket is on or on the pusher or mount. My second thought is to check tire pressures all the way around the tractor.

 

[Jackfr]

Try adding air to the right rear or deflate the left rear some

 

[jimglassford]

You need to park the tractor on a level surface. Use a bubble level to start checking to see what is tilted. is it possible that the pusher is not welded perfectly square?