1250 backhoe pics

[ken galloway]

Any one have a 1250 with the frame mount for a backhoe. I would like to see pics of where it mounts I have a chance at a 3pt mount but would like to make it a frame mount.Thanks, Ken

 

[sikboater]

Ken, I have a frame mount backhoe on my 1240... (Woods 6500 ?) I will try to take some shots for you tomorrow and post them...

Tim

 

[ken galloway]

Thank you!

 

[sikboater]

Here are some shots, kind hard to see... Left me know if you have more questions and I will try to answer.

Tim

 

[ken galloway]

the front looks like it bolts to a strap around the front but i cant tell what it bolts to

 

[sikboater]

Kinda hard to explain.... The front is attached with a 1 1/2 foot bar that feeds though a bracket mounted on the loader frame under the tractor, one bracket per side. The backhoe frame has a triangular piece of steel that the bar goes through and holds the bh frame in place. The rear is held on my a U shaped bracket on the bottom of the tractor under the three point attachments. The bh frame slides into this U bracket. There is also a connection to the top of the three point that holds the bh frame in place along with the bar in the front bracket..... You can see this bar in the 2 photo that feeds thought and the bracket that mounts to the loader frame...

Does that make sense at all? I can try to get more pictures that explain this part better.. :^)

Tim

 

[ken galloway]

Thanks I think I understand now! ,Ken

 

[wrenchturner]

I have a 1250 with a backhoe and it does not look like the one in the pictures.
If I had my tractor near by I would take some pics and send then to you.