12v Solenoid Valves for Rear Remotes

dkhntr04 · Nov 22, 2011

I'm looking for options for 12v solenoid valves to run rear remotes on my McCormick CTV28. Need an open center, work ports closed in neutral, 3 position valve that will handle 5.8 GPM. I bought an 8 GPM Wolverine manual valve, but can't find a spot to put it that I really like. If I can go electric, I can mount everything on the underside of the tractor and keep the install clean and keep the hoses and such away from the operator.

Currently the front runner are these valves from Surplus Center. Surplus Center - 12 VDC 10 GPM OC DA SOLENOID VALVE

2 valves with subplate and connectors is going to run about $360 plus S/H.

Are there other options out there that you know of for 12v valves? Thanks:thumbsup:

J_J · Nov 22, 2011

Sounds like you have it covered. Those valves are either full on or off, no feathering.

DJNebraska · Nov 23, 2011

Sounds like you need tandem center valves with a series circuit manifold. Both can be found at HydraulicStore.

Tandem Center D03 Valve, DIN, 12VDC (Includes Connectors)

Series Circuit Manifold (No Relief)

All for $310.60 + S/H.

Good luck!