1320 Wont Start

[SRF34]

I stalled the machine trying to dig out a rock. Now it wont start. Getting plenty of juice from the battery but wont even turnover. P Brake is in, clutch is in, 3pt pressure is off. Thoughts? Thanks.

 

[casingbill]

Is it making any noise when you try to start it? clicking or anything? starter could be jammed...you can try tapping it with a hammer. I'm not familiar with the 1320 but make sure all levers are in place. I know I have knocked my shifter out of medium gear and when its in between, it wont start.

 

[dqdave1]

Check the main fuse that is located by the starter in a black assembly. If not this , look under left side rear fender under 4 wheel pto levers and make sure all wires are attached to switches.

 

[SRF34]

Figured it out. The rod connected to the clutch pedal that actuates the kill switch was bent - must have been bent while I was working on stumps, rocks etc in the woods. Once I bent it back, it made contact with the switch and all is good again. Thanks for the advice.