Backhoe 1500D backhoe?

[dgraham]

I have a 1500D with loader and am considering a small backhoe. I found a good deal on one that has its own pump and would be frame mount. I could build a rear frame section that connects to the loader frame mount. I have read a few comments that 3 pt mount is not good and tractor hydraulics don't have enough flow, so this might be OK? Any opinions?

 

[lens12]

3 pt mount is not good , if the tractor is too light & a 3 point locking bar is not used. Your tractor flow maybe enough depending on the size of backhoe. I would recommended building a subframe is for your tractor & using the hoe pump is fine.