Loader 16LA curl hose spec?

   / 16LA curl hose spec? #1  

TC 40 Chuck

Member
Joined
Mar 3, 2012
Messages
39
Location
NW PA
Tractor
NH TC40A
So, I blew a hose & thought that'd drive 2 mi to TSC instead of 30 to CNH dealer.

Put a freshly made hose on the tee fitting to curl cylinder and still leaks (a VERY small leak, but a leak...). Does anyone know the specs for the angle on the tee fitting? Is it "standard" like a "generic" fitting that I'd get from TSC crimped on the hose? OR - is it "different"?

Thanks in advance!:confused:
 
   / 16LA curl hose spec? #3  
FWIW - The curl hoses, especially, can see significantly above system relief pressure with various work loads when the curl spool is centered. Iv gone to 4kpsi hoses in that circuit after failure of the original hoses. The uncurl/dump side is much less pressure stressed.
larry
 

Tractor & Equipment Auctions

Willmar 4300 Wrangler Loader (A52128)
Willmar 4300...
1989 Freightliner Cabover FLA086 (A52128)
1989 Freightliner...
2015 CATERPILLAR TL1055C TELESCOPIC FORKLIFT (A51242)
2015 CATERPILLAR...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2018 Ford Escape SE AWD SUV (A50324)
2018 Ford Escape...
John Deere Hayrack (A50515)
John Deere Hayrack...
 
Top