Loader 16LA curl hose spec?

[TC 40 Chuck]

So, I blew a hose & thought that'd drive 2 mi to TSC instead of 30 to CNH dealer.

Put a freshly made hose on the tee fitting to curl cylinder and still leaks (a VERY small leak, but a leak...). Does anyone know the specs for the angle on the tee fitting? Is it "standard" like a "generic" fitting that I'd get from TSC crimped on the hose? OR - is it "different"?

Thanks in advance!

 

[RickB]

37 degree JIC I believe it is size -8 but it could be -6. Not at all exotic or unusual.

 

[SPYDERLK]

FWIW - The curl hoses, especially, can see significantly above system relief pressure with various work loads when the curl spool is centered. Iv gone to 4kpsi hoses in that circuit after failure of the original hoses. The uncurl/dump side is much less pressure stressed.
larry