jud225
New member
18 hp kohler, old style was ran out of oil. any chance to rebuild it??? jud225
18 hp kohler
- Thread starter jud225
- Start date
- Views: 457
eddie48
Gold Member
- Joined
- Aug 17, 2012
- Messages
- 264
- Location
- McDonough, NY
- Tractor
- TC45DA, TC40DA, Farmall Super A, New Idea spreader, Dolmar and Echo saws, Yanmar MIniEx, Ford 3550 backhoe, lots of junk
If it is the 18hp cast iron engine, absolutely. If you are lucky, all you will need is a new rod.
jaotguy
Veteran Member
without taking the head off and checking the cylinder for scoring , no way to tell for sure ....
might be a light seize ( just free things up and away you go ) right up to a full blown welding rings to cylinder walls and a scrapped crank/ rod and piston .... more $$$$ to rebuild than buying another good motor ...
lots of kits available if you can salvage the block /crank .....
might be a light seize ( just free things up and away you go ) right up to a full blown welding rings to cylinder walls and a scrapped crank/ rod and piston .... more $$$$ to rebuild than buying another good motor ...
lots of kits available if you can salvage the block /crank .....
deerseeker001
Super Member
- Joined
- Jul 20, 2011
- Messages
- 5,734
- Location
- Central wisconsin
- Tractor
- International 2500a with Loader
Welcome from Wisconsin
