1997 F150 Electrical Issue
- Thread starter deerefan
- Start date
- Views: 2336
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i'm with the others.. somewhere something was leaking to / affecting the brake circuit, and thus tripping the cruise...
ever see turn signals make a brake controller pulse.. etc..
ever see turn signals make a brake controller pulse.. etc..
JJZ 109
Veteran Member
- Joined
- Feb 7, 2009
- Messages
- 2,175
- Location
- Lake Ontario/St. Lawrence River
- Tractor
- Kubota BX2380/LA344 loader/60" MMM, Bobcat S185 skid steer, JD X394 4 wheel steer mower
I've read where the 3rd brake light can also cause issues with the button on the shift lever that turns off overdrive and make that light flash.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
is that a gem wireing issue? I know when i had a water leak from a top cab light.. water ran down driver side pillar and got GEM module wet.. and i had that OD light blinking on my 99 350.
removed and resealed all my cab lights and it took care of the issue. AFTER i got a new GEM module
removed and resealed all my cab lights and it took care of the issue. AFTER i got a new GEM module
OP
deerefan
Veteran Member
Soundguy said:is that a gem wireing issue? I know when i had a water leak from a top cab light.. water ran down driver side pillar and got GEM module wet.. and i had that OD light blinking on my 99 350.
removed and resealed all my cab lights and it took care of the issue. AFTER i got a new GEM module
No cab lights, but it could be a gem issue. The truck does have a few electrical gremlins.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
any time i see weird electrical problems involving gauges, dash lamps, dome lamps, map lights and door lamps / door open sensor.. I think GEMM.. it controlls ALL that.
I thought my truck was posessed. it's door locks were auto locking and unlocking. gauges bouncing all over.. etc...
I thought my truck was posessed. it's door locks were auto locking and unlocking. gauges bouncing all over.. etc...
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
i hate shift on the dash. I miss that on my old dodge.. 2nd stick..e tc.
manual hubs?
manual hubs?
