My 1998 JD 4100 HST won't go into reverse or go forward. The shift lever between low and high now just slides back and forth and won't click into either position. I was moving some dirt around and stopped to back up and tractor wouldn't move either forwards or reverse. Tractor was just serviced by dealer and hydraulic fluid is good. Tractor has 550 hours on it. Any advice would be greatly appreciated. Thanks.
1998 JD 4100 HST won't move
- Thread starter feh3rd
- Start date
- Views: 2181
-
- Tags
- john deere 4100
Sorry, I don't know your tractor model well but if there are any linkage connections they would need to be checked to see if anything has come apart. If the shifter is directly connected to a shaft that runs into the gear box then the only thing you can check is that the connection there is rotating the shaft. If it is, then the problem is likely internal and time to call a specialist.
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,715
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
Check your private messages