Servicing and repairing all the neglected problems has taken a while. I have a shop manu and an operators manual now. Both say to remove the low pressure circuit strainer and clean when servicing. Problem is I don稚 see it! It is supposed to be located beside the hydraulic screw on filter. My operators manual has a picture showing filter labeled 1. The legend under picture has 1. as hydraulic filter and 2. as the circuit strainer but doesn稚 locate it in picture. It痴 a 2000 model.
2000 NH 6610S Hydraulics
- Thread starter kbright
- Start date
- Views: 570