Harry in Ky
Veteran Member
The starter has a ground wire? Can you elaborate a little on that?
I had the same problem with my 2000 tc29d. It turned out to be that the ignition switch was loose and instead of going all the way to the start position it stopped short.Good day folks,
Blue wouldn't start for me today. I call her Blue on account of her color...lol!
Hope you don't mind me running this by you before I go down the part buying trail. I suspect it is the ignition switch but at $300 per unit want some more assurances before ordering. Am I missing anything in your opinion?
Thanks in advance for your help and interest!
This is what I've done.
1) Tested continuity between starter engage pin on switch with starter connector - Good.
2) Engaged glow plug. Illustrated good on dash.
3) Positioned key in run position. Illustrated good on dash.
4) tested voltage in run position, good. On glow plug position, good. When I move the key to start position, I LOSE VOLTAGE.
5) the seat safety switch is disconnected and shorted out to make a closed circuit. Been this way for years.
Also it appears this switch part number is dependent on the PIN of the tractor. I have looked on the tractor and online for the PIN but can't find it. If anyone knows of this please pass it along.
Thanks again and cheers, Greg.
Thanks for this .... a lot cheaper than OEM.... I almost dropped when quoted. cheersIgnition Switch with Keys, Tractor Ignition Switch 86405634 Replacement for New Holland Boomer 3045 2035 3040 20303050 T & TC Series Tractors T2210 T2220 TC29DA TC31DA TC33DA TC34DA TC40A
22.99 on Amazon if you ever need one.
Meant to say battery wire.... I was burnt out.... good catch.... cheers.The starter has a ground wire? Can you elaborate a little on that?
Sorry missed this.... no nothing happens. As it turns out not getting 12v to the solenoid activate terminal. traced the wire to a relay and checked good for continuity. Cheers,Maybe I missed it in your description- does the motor turn over when you try to start it or nothing happens?