I ordered a TTWT inspired Artillian grapple today. I was disappointed to learn that Artillian does not have a hose kit that goes from the JD true 3rd function hard line quick disconnects to the Artillian splitter manifold. I also ordered the Artillian hydraulic flow control valve as I have the Hydrosplus upgrades. Will I have to get custom hoses made or is there an existing kit on the market? Thank you.
2038R True 3rd Function to Artillian Splitter Manifold
- Thread starter NAB
- Start date
- Views: 988
kennyd
Advertiser
You will have to get hoses made, 1/4" ones are all you need.
kennyd
Advertiser
You can contact me directly if you want...
The problem with a 'kit' is the 100's of variables that could be involved. Different hoses lengths, different connectors, different QD's styles and sizes, ect. All to go on two other manufacturers products that you have no control over.
The problem with a 'kit' is the 100's of variables that could be involved. Different hoses lengths, different connectors, different QD's styles and sizes, ect. All to go on two other manufacturers products that you have no control over.
