I have a 2040 with a 145 loader on it. When I fill it with Hyd. Oil am I supposed to have the loader up, down, or in the middle? It seems like when I fill it with the loader down and bring it to the up position I run a bit low on oil but that may not be true only the dipstick shows that it is low. I have only had it about a month and am new to the loader thing...
2040 Hyd. oil question
- Thread starter Firehawk
- Start date
- Views: 1145
DieselPower
Elite Member
- Joined
- Sep 30, 2006
- Messages
- 2,756
- Location
- Fairfield, PA
- Tractor
- JD 3020, JD 4230, JD 7410, JD 2440, MF 750, NH LS170
You should check the fluid level with the loader down. If you fill the system with cylinders extended it could push oil out when everything is retracted causing a spill.
kennyd
Advertiser
On most tractors, you check the fluid with the FEL and the 3PH in the fully lowered position.
