2210 quotes

[JDFANATIC]

hehaw,

It's as simple as can be: Pull pins and turn guide rollers (4) 90 degrees, lower deck to ground, disconnect quick coupler on drive shaft, pull 2 quick pins, slide off front guide bar, raise rockshaft control, and then push mower with foot out from under tractor.

 

[BobB]

When rolling the mower from underneath the tractor. Be aware of the filter on the rear axle. The MMM wheel post can hit and dent (Puncture) the filter.
Bob

 

[JDFANATIC]

Bob,

I've heard this mentioned, but when I last removed the MMM, for the life of me I couldn't figure out how that could happen. I know that probably means I'll be the next one posting a warning. /forums/images/graemlins/confused.gif

 

[mhalla]

</font><font color="blue" class="small">( When rolling the mower from underneath the tractor. Be aware of the filter on the rear axle. The MMM wheel post can hit and dent (Puncture) the filter.


I've heard this mentioned, but when I last removed the MMM, for the life of me I couldn't figure out how that could happen. )</font>

<font color="green"> As Bob mentioned it is the adjusting post on the gauge wheel sticking up that can smack the filter real good if you don't slide the MMM in nice and straight. It happened to me. /forums/images/graemlins/blush.gif

Mike

</font>