wxboy
Bronze Member
Just curious what RPM other 2305 owners are using for mowing with MMM and what kind of fuel consumption you are seeing when mowing?
2305 RPMs for mowing and Fuel consumption
- Thread starter wxboy
- Start date
- Views: 4495
-
- Tags
- john deere 2305
chipsndust
Platinum Member
I've been setting the RPM's where indicated on the tach. Seems to work fine, I don't need to slow down for "heavy" tall grass. I haven't kept track of fuel consumption, but I know I'm getting twice as many mowings per tank as I did with my (gas)LX255
chipsndust
Platinum Member
I've been setting the RPM's where indicated on the tach. Seems to work fine, I don't need to slow down for "heavy" tall grass. I haven't kept track of fuel consumption, but I know I'm getting twice as many mowings per tank as I did with my (gas)LX255
orlo
Platinum Member
Hi:
You probably want to use the 2900 RPM indicated to get the full 2100 rpm on the front PTO. Cutting at a lower RPM will lower the cut quality since you'll reduce the tip speed of the blade.
You'll get great consumption no matter what engine speed you use so it's not worth trying to economize. I cut (Smooth terrain) full pedal on Hi in the hydro at about 9mph (Except for hills) and fuel consumption is great for the 5 acres a Mow.
You probably want to use the 2900 RPM indicated to get the full 2100 rpm on the front PTO. Cutting at a lower RPM will lower the cut quality since you'll reduce the tip speed of the blade.
You'll get great consumption no matter what engine speed you use so it's not worth trying to economize. I cut (Smooth terrain) full pedal on Hi in the hydro at about 9mph (Except for hills) and fuel consumption is great for the 5 acres a Mow.
orlo
Platinum Member
Hi:
You probably want to use the 2900 RPM indicated to get the full 2100 rpm on the front PTO. Cutting at a lower RPM will lower the cut quality since you'll reduce the tip speed of the blade.
You'll get great consumption no matter what engine speed you use so it's not worth trying to economize. I cut (Smooth terrain) full pedal on Hi in the hydro at about 9mph (Except for hills) and fuel consumption is great for the 5 acres a Mow.
You probably want to use the 2900 RPM indicated to get the full 2100 rpm on the front PTO. Cutting at a lower RPM will lower the cut quality since you'll reduce the tip speed of the blade.
You'll get great consumption no matter what engine speed you use so it's not worth trying to economize. I cut (Smooth terrain) full pedal on Hi in the hydro at about 9mph (Except for hills) and fuel consumption is great for the 5 acres a Mow.
fgross335_2210
Gold Member
Slightly different but almost the same, I have a 2210 w/62C, and I run'er wide open. Been doing this for 4 years, cuts great. Tach says 3000 or so, just slightly above the "PTO" line on the tach. Doesn't use much fuel no matter what, fuel consumption way lower than my 335GT w/20HP gas.
fgross335_2210
Gold Member
Slightly different but almost the same, I have a 2210 w/62C, and I run'er wide open. Been doing this for 4 years, cuts great. Tach says 3000 or so, just slightly above the "PTO" line on the tach. Doesn't use much fuel no matter what, fuel consumption way lower than my 335GT w/20HP gas.
rvtech
Gold Member
Mowing 5 acres. I always run it wide open for blade speed. Uses between 2.5 and 3.5 gallons depending on load (grass height)
rvtech
Gold Member
Mowing 5 acres. I always run it wide open for blade speed. Uses between 2.5 and 3.5 gallons depending on load (grass height)