2320 FEL Will not move when hydro lines connected

[Zebrafive]

Current colors are
Blue- boom lift, head end of cylinder
Red- boom lower, rod end of cylinder
Yellow- bucket dump, head end of cylinder
Black- bucket curl, rod end of clyinder

Green and Orange are now third function colors.

Make sure on your valves you pair the colors, Blue and RED on the same valve and Yellow and Black on the same valve. Your valve or mid mount couplers will be inline horizonally, not vertically.

Colored tye wraps are an excellent idea to mark the hoses. Mine came marked that way. I bought 100 packs of each color at Grainger for future use.

 

[yelbike]

Regardless of the color, trace the lines down the loader. Play with the hose orientation. You'll get it. Once you got it right mark it proper with colored electrical tape.

 

[Mico75]

Hi Z5:
This is very helpful as I have those colored caps (minus the red) on my FEL hoses. Do you know what number the colors correspont to on the tractor inputs? Would save me some time tracing hoses under the tractor.
Thanks again for all the help.

 

[aczlan]

Hi Z5:
This is very helpful as I have those colored caps (minus the red) on my FEL hoses. Do you know what number the colors correspont to on the tractor inputs? Would save me some time tracing hoses under the tractor.
Thanks again for all the help.

Connect one line (and only one line) to one of the tractor quick connects and move the loader control around. When that port is activated, you should see that line move. Relive pressure, switch to another port and repeat. Should take you 10 mins to find what all 4 lines do.

Aaron Z

 

[Zebrafive]

Hi Z5:
This is very helpful as I have those colored caps (minus the red) on my FEL hoses. Do you know what number the colors correspont to on the tractor inputs? Would save me some time tracing hoses under the tractor.
Thanks again for all the help.

Best to ask this (color pattern of the tractor mid mount couplers) in the John Deere Owning Operating section. Lot of 2320 owners there, I would only be guessing

 

[Mico75]

Hi Everyone:
Thanks for all of the help and feedback. Got it all hooked up this evening and working just fine!