2320 Update

[johndeere_2210]

KEY NEW FEATURES OF THE 2320 TRACTOR

Engine

New isolated Yanmar TNV ''Clean & Silent'' diesel engine
Meets Tier II emission standards
Engine features lower levels of exhaust and emissions
Isolated engine for quieter operation
24 gross horsepower - 18 PTO horsepower (5.8% increase in PTO hp over the 4110 Tractor)

Powertrain
Standard HST transmission with Twin Touch foot pedals
Allows for increased performance
Larger tires
Hydraulics
Standard dual mid selective control valve with integrated loader joystick
Two options for raising and lowering the mid-mount mower deck
Standard mechanical lift system - uses 3-point hitch to raise and lower mower deck
Optional independent lift kit - uses tractor hydraulics to raise and lower mid-mount mower deck, providing the ultimate in versatility and flexibility
Operator Station and Controls
Ag tractor family styling
One-piece hood design
New instrument panel, dash, and throttle design
Molded foot deck
Standard folding ROPS
Standard mid rockshaft with mower deck height adjustment
Molded foot deck
Implements
200X and 200CX Loaders
Commonality of loaders and rear implements between 2305, 2320, and 2520
New drive over deck with ''Stow and Go'' feature
Note:
See Equipment for Compact Utility Tractors for information on implements.
STANDARD EQUIPMENT FOR THE 2320 TRACTOR
Folding ROPS
Dual mid selective control valve with integrated loader joystick control
Power steering
4-wheel drive
Mid PTO
Wet-disk brakes
Cruise control

 

[jimdiesel1]

Good info! The 2320 will have the Yanmar 3TNV76 engine,and tire sizes will be 31x13.50-15(R-3) or 12-16.5(R-4)rear and the fronts will be 23x8.50-12

The 2520 will be powered by a 3TNV82A,with 36x14-15 (R-3)with 24x8.50-14 fronts or in R-4 you will get 14x17.5 rears matched with23x8.50-12's <font color="green"> </font>

 

[JDFANATIC]

SWEEEEEET! /forums/images/graemlins/grin.gif

 

[bglombowski]

Good job on finding this info guys! This is one of the things I've been waiting for, a blend between the 2305 and a slightly larger frame. I'm guessing the pump rate will be a little higher and the axle loads will be higher. Nice pic! Keep the info coming. Oh, the other thing I've been waiting for... approval from the wife, which I finally got. Now we'll just have to sit tight waiting for availability.
Thanks,
Brian

 

[JDFANATIC]

Brian,

Great! You'll be our first 2320 owner then! /forums/images/graemlins/grin.gif

 

[bglombowski]

JDFANATIC,
Not sure if I'll be the first owner of one, but I'll certainly let all you guys know when I get it. It's quite a chunk of change, so hopefully the availability coincides with great Spring finance rates. Boy, it's gonna be a long cold Winter pushing snow down a 350 foot driveway with the JD316.

 

[73jeep]

So if the 2320 shares the same engine as the 2305, and it has the same engine and PTO HP(24 & 18), does this mean it's rated @ 3000 rpm like the 2305 ? If it's rated @ 2600 rpm(or 2650 like the 4110 was), seems like the HP numbers would be lower than for the 2305.

 

[rockyridgefarm]

3TNV76 GRAPH

 

[73jeep]

So by looking at the graph, for the 2320 to have 24 HP it will be rated @ 3000 rpm ?? 18 kw = 24 hp

 

[orangebluegreen]

Looks like they have addressed some of the things I didn’t care for on the 4110....mainly the tire size, engine isolation and power. Wanting a small tractor with deck “stick out” and best possible ride over bumps, it made little sense the 4110 had wide but short tires defeating the purpose of a narrow tractor IMO. Too bad they didn’t go for the narrower but taller 33” rears. Will be curious if the engine feels as smooth through the frame as the 2210 did. When I tried a 4110 (supposedly the same engine as 2210) it felt much rougher through the seat of the pants compared to the 2210’s very smooth feel.

Anyone have:
Weight
Wheelbase
Tread width to outside of rears
Turning radius
Deck sizes (72”?)