Price Check 2320 vs. 2520 Price difference

[Skipholiday]

Did your 3pt. rub? Just curious.
I was under the impression both these tractors were the same frame, if that's so how could the 2520 have more clearance?

December or the 1st of the year before mine is delivered.
Larger tires give the extra clearance as well the movement of the hydraulic components from under the floor panel should help.

To prevent them from rubbing on the tires, get an Imatch from JD.

Eliminate 2 problems-no rubbing and faster hookup for more play, I mean work time.

How much is the iMatch system?

 

[aesanders]

Imatch is about 2 hundred. It does work great.

 

[wingsaircharter]

My 2520 rubs a little with the box blade that I am borrowing. I think some of the other blades I have measured are narrower so the arms may not rub. I adjusted the arms to center it better and they don't rub quite as much. This older box blade didn't match up good enough with the I-Match to be able to leave it on.

My price for the 2520, 200CX FEL with the wider (61"?) bucket, 62 mid mower, 47 inch snowblower, Frontier Pallet forks, and I-Match. $19398.16. I think it was a pretty good price. I also took advantage of the 0% for 36 months. I paid about 1.5% more to do that. They added a rear light and block heater for $150-$200 (don't remember exactly) after the tractor came in. Payments are something like $486 per month after paying 10% down. Hope this helps you 2520 buyers.

 

[TomKioti]

Thanks Wings. Good info

 

[Nuru]

My 2520 rubs a little with the box blade that I am borrowing. I think some of the other blades I have measured are narrower so the arms may not rub. I adjusted the arms to center it better and they don't rub quite as much. This older box blade didn't match up good enough with the I-Match to be able to leave it on.

My price for the 2520, 200CX FEL with the wider (61"?) bucket, 62 mid mower, 47 inch snowblower, Frontier Pallet forks, and I-Match. $19398.16. I think it was a pretty good price. I also took advantage of the 0% for 36 months. I paid about 1.5% more to do that. They added a rear light and block heater for $150-$200 (don't remember exactly) after the tractor came in. Payments are something like $486 per month after paying 10% down. Hope this helps you 2520 buyers.

Gee that is a good deal!

 

[ducati996]

Imatch is about 2 hundred. It does work great.

I believe the harbor freight version is still $69 bucks. There is a thread on this site about it - works very well for most everybody (including myself)

Save some coin as well

 

[aesanders]

I believe the harbor freight version is still $69 bucks. There is a thread on this site about it - works very well for most everybody (including myself)

Save some coin as well

I almost got the Harbor feight quick connect, but I read on this sight some people having problems with it. The sizing was not uniform and it would not line up with some implements it should have. They may have worked out the bugs with it by now and if they have then it would be a better deal.

 

[TomKioti]

Ducati,

Does the 200cx come with a standard QA for the loader bucket? Is it even offered? I know the loader itself is QA. Curious.

 

[aesanders]

I'm not Ducati, but I'll try and answer the question.

The Bucket is a quick attach design. It is however a John Deere exclusive quick attach so you will need to find attachments with this attaching system.
I've seen a few attachments like pallet forks for it.

HTH

 

[TomKioti]

Thanks Aesanders,

That clears that up for me.