Have a 2350 w/under 10 hrs. I just started experiencing a problem w/ the lift control for the 3pt and mmm deck. All was working well when suddenly, while using the 3pt w/ a scraper blade, the lift control began raising both the 3pt and the mmm deck regardless of the position of the selection lever. Before going to the dealer for warranty work, I thought I'd try to find out if there is a simple fix that I'm missing.
2350 Lift Control Problem
- Thread starter retchief
- Start date
- Views: 752
rdsaustintx
Veteran Member
Huh? The MMM linkage rides on top of the 3ph linkage. Even with deck position in "TOP", the 3ph can raise the deck off the stops.
RDnT
RDnT
Here are some similar links:
