2750D snowblower
- Thread starter whatever1
- Start date
- Views: 640
George the Beagle
Gold Member
1. 80-90.
2. No bevel, just holes drilled to accept the bolts. Get the bolts as the heads will be half worn off on the old ones if you've let it wear down a lot.
2. No bevel, just holes drilled to accept the bolts. Get the bolts as the heads will be half worn off on the old ones if you've let it wear down a lot.
Dave M7040
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 2,757
- Location
- Williamstown Ontario Canada
- Tractor
- Kubota M7040 Nuffield 465
Best to get a gear oil with an extreme pressure additive. It will say gear oil and extreme pressure on the container.
The extreme pressure additive handles high load contact between two gear faces. Often it is a sulfur compound.
The only caution is if you have a worm gearbox which will likely have one gear made of brass or bronze. The sulfur will attack these metals
Worm gear boxes are found on walk behind snow blowers and on front mount small tractor blowers.
Dave M7040
The extreme pressure additive handles high load contact between two gear faces. Often it is a sulfur compound.
The only caution is if you have a worm gearbox which will likely have one gear made of brass or bronze. The sulfur will attack these metals
Worm gear boxes are found on walk behind snow blowers and on front mount small tractor blowers.
Dave M7040
