3 cyl vs. 2 cyl?

[Car Doc]

I have thought using my tractor would be the perfect vehicle to finally teach my wife how to drive a stick she could dump the clutch all she wants and not scare her. (or me)

 

[yotang224]

My YM1300 is a 2-cylinder model and 35 years old. It is somewhat noisy, but it is very simple and strong.
Although it sank in the flood twice, it revived always completely.

 

[kenmac]

My YM1300 is a 2-cylinder model and 35 years old. It is somewhat noisy, but it is very simple and strong.
Although it sank in the flood twice, it revived always completely.

From Japan ??? Welcome:thumbsup::thumbsup::thumbsup:

 

[Car Doc]

My YM1300 is a 2-cylinder model and 35 years old. It is somewhat noisy, but it is very simple and strong.
Although it sank in the flood twice, it revived always completely.

Glad to have you here I bet us Yanmar owners can learn a lot from you!

I think you are the only person from Japan I have seen on here! :thumbsup:

 

[careyo63]

I seen that also He just don't know how valuble a translater could come in handy around this Forum. Sure hope he frequents here alot more often.:thumbsup:

 

[yotang224]

Glad to have you here I bet us Yanmar owners can learn a lot from you!

I think you are the only person from Japan I have seen on here! :thumbsup:

Really?
Please don't forget Japanese yanmar fan!
Although countless owner of Yanmar is in Japan, they including me are only somewhat poor at English.

 

[284 International]

Yotang224, welcome, I am glad you are here. I hope to hear more from you. Your photographs are beautiful. I would like to see more of the land and scenery.

 

[winston1]

Yotang224, welcome, I am glad you are here. I hope to hear more from you. Your photographs are beautiful. I would like to see more of the land and scenery.

I am not getting Yotangs pictures, only a couple of boxes with and x in them. Can one of you computer gurus tell me what I need to do to access them?

Welcome Yotang, I bet you can give us a lot of insight on the Yanmars. :thumbsup:

 

[California]

Welcome yotang224!

I think you will soon be a star, with too many people asking you to do translations. Or explanations about operating the tractor. We realize Yanmar intended these tractors for the sort of use we see in your avatar (picture).

Your English is flawless in the posts above. This isn't school, nobody cares about perfection of language when the meaning is sufficient. We would love to read about how these Yanmars are used in Japan.

I already have a question: Does Yanmar corporation still offer parts for the 1970's models? And is there an active third-party (independent) supply for parts that Yanmar no longer sells? One more question: What are the oldest Yanmar tractors that have good parts supply available? Thank you for any answers you can provide.

 

[Car Doc]

Really?
Please don't forget Japanese yanmar fan!
Although countless owner of Yanmar is in Japan, they including me are only somewhat poor at English.

Yes really! I think you will fit right in I know we will be counting on you for a lot of things we just dont know about. So speaking for me and I presume many others we are very happy to be talking to you! :thumbsup:

I am understanding you just fine btw.

 

[yotang224]

Unfortunately, it is very difficult to get the parts of an old tractor in Japan.
Now except for standard parts, such as ball bearings and oil seals, the parts of YM cannot be got. It is because the person using the tractor of the 1970s hardly exists except for an exception like me.
The front axle broke several years ago.
Since I could not get the parts, I welded them by myself. :thumbsup:

I think only way is to find another scrap,probably,it is easier in the US.

I have been to the United States many times.
And I was very surprised when I knew so many old Yanmar tractors were used in the US.I am afraid that all Japanese old tractor were sold off to the US?:laughing:

 

[California]

I am afraid that all Japanese old tractor were sold off to the US?:laughing:

We hear a lot of stories on here about where the old tractors go after they are retired from use in Japan. Maybe you can help fill in the gaps in our knowledge. Here's what we have read:

1) Japanese tax law encourages replacement of a tractor with a new one after a few years. Possibly the tax on the tractor increases as it gets older, or when it is no longer compliant to pollution laws?? This means that export dealers in Japan collect used tractors to sell overseas where they are worth more.

2) One American importer both goes to Japan to make his purchases, AND posts on here occasionally. Here he explained that the Japanese exports go all over the world:
http://www.tractorbynet.com/forums/yanmar/162423-yanmars-going-cost-more-real.html#post1870055

3) Many, maybe half, of the used Yanmars that arrived here were bought in Japan by Vietnamese repair factories and painted like new in VN. Some are in excellent condition beneath the paint, while some have problems. An alternate story is the tractors served a second lifetime working in VN after they were imported there. Then after one lifetime in Japan and a second life in VN, they get painted and sent over here as 'rebuilt'. In any case there were some huge VN-owned import houses here who said they were owned by those 'factories' in VN. (One told me he received 400 tractors each month). Now with the dollar/yen exchange rate down, I think there are only very few US importers remaining and they buy straight from Japan.

4) Many of the Yanmars here are 20-35 years old. Because of the excellent quality they still give good service. Culturally, we expect old tractors to keep on working because many old American tractors are still good at 60 years old. Of course this requires stores that sell repair parts. There is good support for the old American tractors, and now for Yanmars starting from about mid-1970's. I expect much of this support is replica (copy) parts made in China that ignore patent laws.

Do you have any information that corrects this picture? Is our understanding mostly correct?

 

[284 International]

I am not getting Yotangs pictures, only a couple of boxes with and x in them. Can one of you computer gurus tell me what I need to do to access them?

I'm certainly not a computer guru. The pictures are listed as being here and here. I use Firefox on a Mac. Under tools I can go to "Page Info" and there is box to check/uncheck to display (or not display) images from geocities.jp.

This is probably right up Domush's alley; maybe he can give more specific advice.

 

[California]

Thanks 284. I didn't see anything. Your post encouraged me to investigate why. I turned off Adblock and now I see his pictures.

 

[winston1]

I'm certainly not a computer guru. The pictures are listed as being here and here. I use Firefox on a Mac. Under tools I can go to "Page Info" and there is box to check/uncheck to display (or not display) images from geocities.jp.

This is probably right up Domush's alley; maybe he can give more specific advice.

I have a "rough" idea about what you are talking about. I went to "tools" and experimented turning off a few things but never able to pick up his pictures.

I clicked on your "here" and just got a page or two of Japanese writing. This old country boy struggles in this computer generation.

 

[scoops]

I have a "rough" idea about what you are talking about. I went to "tools" and experimented turning off a few things but never able to pick up his pictures.

I clicked on your "here" and just got a page or two of Japanese writing. This old country boy struggles in this computer generation.

Its your security setting in your browser.
Here arre links to the pictures:

http://www.geocities.jp/pasoriko/ym1300.jpg

http://www.geocities.jp/pasoriko/ym1300-1.jpg

 

[284 International]

I'm not sure what to think now. On my iPad, when I click either scoops' links or my own, I get the Japanese page without an image. On my computer, theymworkmfine and show up. Maybe scoops has a hint as to where to look or how to change your settings. What browser and operating system are you using?

 

[Freakingstang]

I'm not sure what to think now. On my iPad, when I click either scoops' links or my own, I get the Japanese page without an image. On my computer, theymworkmfine and show up. Maybe scoops has a hint as to where to look or how to change your settings. What browser and operating system are you using?

I get the same thing on my puter or iPhone.... Red x or Japanese yahoo page

 

[scottlw]

They worked yesterday when i went direct to the image link when i looked at the page source, but i also just get the yahoo page now, maybe gone over bandwidth or removed them?

 

[California]

I just checked, the pictures are still visible. I'm using Firefox.