3 or 4 blade blower wheel on snowblower

   / 3 or 4 blade blower wheel on snowblower #21  
The Plate that partially covers the left or right exit point of the chute prevents any snow entering the chute and impeller drum while the impeller paddle is rotating and throwing snow out through the chute and spout of the snow caster.

EDIT: It should read "the plate barrier covering a portion of the impeller drum opening prevents snow from escaping while the impeller is turning and casting the snow out of the chute and spout"


Whoopsie on my part:eek:
 
   / 3 or 4 blade blower wheel on snowblower #22  
We get 10 to 30 feet of snow each year and on occasion, we can get a lot of snow. My 4 blade arrangement has always handled the load even if it means slowing down to let the blower catch up. The 4 blade arrangement has a symmetry and balance about it that is probably easy on the impeller shaft.

Kubota B3030 HSDC snowblowing Jan 2012 (HD) - YouTube

you guys are way down on snow this year too..? we used to have place in eastern u.p. and I know last two years have been disappointing as far as snow goes. we moved to the inland northwest 3 years ago for the snow. haven't had a good year yet. last year above 4k got hammered but valleys received mostly rain. bummer. I wish kioti would have had a mid pto like kubota so i could use back blade.
 
   / 3 or 4 blade blower wheel on snowblower
  • Thread Starter
#23  
EDIT: It should read "the plate barrier covering a portion of the impeller drum opening prevents snow from escaping while the impeller is turning and casting the snow out of the chute and spout"


Whoopsie on my part:eek:


I figured thats what you meant.

I am going to try and see if I can get a replacment impeller from Erskine.
It looks like they still make my model, with a few improvements.


http://www.erskineattachments.com/attachments-catalog/snowblower-rear-mount.pdf

Thanks,
Brian
 
   / 3 or 4 blade blower wheel on snowblower #24  
If you buy on of clarences impeller kits for the large snow casters you
will be sitting pretty and you will be happy you spent the $30 dollars.
Clarence has lots of happy customers and a link to youtube from his home page to see the casting improvement on older snow casters.
 

Tractor & Equipment Auctions

2017 VOLVO EC160EL EXCAVATOR (A52707)
2017 VOLVO EC160EL...
2013 International WorkStar 7400 Altec AM650 50ft Material Handling Insulated Bucket Truck (A55852)
2013 International...
6 Yard Commercial Dumpster (A51691)
6 Yard Commercial...
2005 EAST 45' WALKING FLOOR TRAILER (A54756)
2005 EAST 45'...
1981 AZTEC SKINNY NECK 31 FOOT FLATBED (A53843)
1981 AZTEC SKINNY...
24633 (A55853)
24633 (A55853)
 
Top