3 point drops
- Thread starter Bwana64
- Start date
- Views: 7113
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Do you not have an UP, neutral, lower on your lever?
OP
Bwana64
Bronze Member
- Joined
- Oct 5, 2012
- Messages
- 66
- Location
- Harris & Fayette Counties, TX
- Tractor
- Kubota B6200, MF 230, JD 4240
I am in the city at work and cannot access that now, but I know it is a B6200E. 2 - wheel drive. Gear, not HST. It was originally set up with a belly mower which operated off a front PTO. With the belly mower, it did not matter because the wheels on the belly mower were adjusted to the mowing height desired. Now it matters. I'm now using the rear PTO with a small rotary cutter. The lever is somewhat like a toggle. To the rear and it raises the implement. Forward and it drops it. It does not stay in either position. It goes back to neutral automatically. It is also right next to my hip when operating, so it can easily be bumped without noticing and change the height of the implement.
Last edited:
