micman32
Gold Member
Have a Yanmar 221 with a quick hitch. When I use my Landpride Brush hog it will not lift the tail wheel end off the ground. I am sure it's not set up right. Just wondering what anyone thinks and advise.
3 point hitch
- Thread starter micman32
- Start date
- Views: 2918
topbuilder
Gold Member
- Joined
- May 27, 2012
- Messages
- 494
- Location
- Lone Stare State
- Tractor
- New Holland 345D shuttle, Rayco RG 50 Super, Southern Tractor (Hinomoto) E-280
If the cutter is coming off the ground at the three point hitch, you may just need to shorten the top link some. In the down position, while mowing, you want the tail wheel touching and the bottom of the brush hog not touching.
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,777
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
Shorten the Top Link.
OP
micman32
Gold Member
I will try that. Thanks!
OP
micman32
Gold Member
Problem solved! The A frame on the cutter needed to be moved to the lower set of holes. Landpride had a note the manual about this.