3 pt hitch lift arms w/offset - any fabricators?

   / 3 pt hitch lift arms w/offset - any fabricators? #11  
I'm inferring that you no longer have the arms since they didn't fit, which is why you need new ones fabricated, correct?
 
   / 3 pt hitch lift arms w/offset - any fabricators? #12  
</font><font color="blue" class="small">( I fabricated a TNT for my BX2200 and encountered a similar problem.)</font>

DW,

Excuse my ignorance, but what is a TNT?

JG
 
   / 3 pt hitch lift arms w/offset - any fabricators?
  • Thread Starter
#13  
I still have the arms. I just need to be able to spread them a bit wider for some of my equipment, and the tires get in the way. The tires are already reversed as one person suggested, so the best solution is to offset the arm. I really don't need but about an inch on each side, for a total of 2". The offset arms I tried, but were much too short, had an offset of about 4 inches per side. I can't really imagine anyone needing that much offset.

ns
 
   / 3 pt hitch lift arms w/offset - any fabricators? #14  
</font><font color="blue" class="small">( DW, Excuse my ignorance, but what is a TNT?
)</font>
Danny is referring to a "top and tilt" system that allows the top link and lift arm to change positions hydraulically instead of having to get off the tractor and do it by hand. Quite handy to have. John
 
   / 3 pt hitch lift arms w/offset - any fabricators? #15  
Since you still have the offset arms, why not have them modified by lengthing them as previously suggested?
 

Tractor & Equipment Auctions

2011 Ram 1500 4x4 Crew Cab Pickup Truck (A50323)
2011 Ram 1500 4x4...
2012 KENWORTH T800 (A50854)
2012 KENWORTH T800...
PLEASE CHECK BACK!!! ITEMS BEING ADDED DAILY!!!! (A50775)
PLEASE CHECK...
Roose Hog Cart (A50515)
Roose Hog Cart...
2016 FORD TRANSIT 250 VAN (A51406)
2016 FORD TRANSIT...
3in Poly Pipe (A49461)
3in Poly Pipe (A49461)
 
Top