3 pt hitch lift arms w/offset - any fabricators?

[Slamfire]

I'm inferring that you no longer have the arms since they didn't fit, which is why you need new ones fabricated, correct?

 

[B7510]

</font><font color="blue" class="small">( I fabricated a TNT for my BX2200 and encountered a similar problem.)</font>

DW,

Excuse my ignorance, but what is a TNT?

JG

 

[NCShelton]

I still have the arms. I just need to be able to spread them a bit wider for some of my equipment, and the tires get in the way. The tires are already reversed as one person suggested, so the best solution is to offset the arm. I really don't need but about an inch on each side, for a total of 2". The offset arms I tried, but were much too short, had an offset of about 4 inches per side. I can't really imagine anyone needing that much offset.

ns

 

[KiotiJohn]

</font><font color="blue" class="small">( DW, Excuse my ignorance, but what is a TNT?
)</font>
Danny is referring to a "top and tilt" system that allows the top link and lift arm to change positions hydraulically instead of having to get off the tractor and do it by hand. Quite handy to have. John

 

[Slamfire]

Since you still have the offset arms, why not have them modified by lengthing them as previously suggested?