336D

My tachometer stopped working any suggestions??
Any noise? If the problem is internal to the tach it was likely preceded by screeching.

Trace the cable from behind the tach down to the engine, be sure both ends are attached.

Inside the visible outer sheath is a wire that is rotated by the engine. You can detach the upper end and verify that the core spins when the engine is running.
 
/ 336D #3  
Here's a photo of the underside of the dashboard on a smaller Yanmar. I had to remove it to replace the steering box on a prior YM186D.

This may give you some idea of what's under there, that you can only feel with your fingertips. A tiny miniature version of water pump pliers works well to detach the tach cable.

p1640417ym186drundersidedashboard-jpg.280630
 

Marketplace Items

(INOP) 2016 CATERPILLAR 259D SKID STEER (A52709)
(INOP) 2016...
2022 John Deere Z930M (A57148)
2022 John Deere...
2007 Ford F-550 Crew Cab 11ft Flatbed Truck (A55852)
2007 Ford F-550...
2008 Chevrolet C7500 Altec TA40 41ft. Bucket Truck (A59230)
2008 Chevrolet...
UNUSED FUTURE 40" HYD TILTING BUCKET (A52706)
UNUSED FUTURE 40"...
DEUTZ MARATHON 60KW GENERATOR (A55745)
DEUTZ MARATHON...
 
Top