36" Rear Dirt Scoop
- Thread starter crackpot
- Start date
- Views: 5883
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,163
Re: 36\" Rear Dirt Scoop
Brent, here is a 24" hooked to a Yanmar YM2000, (about 1700 pounds). I was told by the dealer that a 30" would be too big for my tractor, and he may have been right. That's about 400# of rocks in there and I wouldn't want to carry any more than that.
Brent, here is a 24" hooked to a Yanmar YM2000, (about 1700 pounds). I was told by the dealer that a 30" would be too big for my tractor, and he may have been right. That's about 400# of rocks in there and I wouldn't want to carry any more than that.
Last edited:
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: 36\" Rear Dirt Scoop
My yanmar 1700 holds a 30" scoop pretty well. I added about 180 # on the front ( probably needed 20-40 more ) And have moved up to 500# of dirt with it. The 'frame' on the 1700 will be similar to your 2000.. but just not as beefy as your tractor. Also, the frame on my scoop is "L" channel angle iron, and thus weighs a bit less ( and not as strong ) as your tube scoop... In any event.. with the scoop loaded fully, I have never come close to loosing a pin, or flexing the frame whatsoever..no stress marks in the paint or at the welds.
Soundguy
<font color=green>Brent, here is a 24" hooked to a Yanmar YM2000, (about 1700 pounds). I was told by the dealer that a 30" would be too big for my tractor, and he may have been right. That's about 400# of rocks in there and I wouldn't want to carry any more than that.
My yanmar 1700 holds a 30" scoop pretty well. I added about 180 # on the front ( probably needed 20-40 more ) And have moved up to 500# of dirt with it. The 'frame' on the 1700 will be similar to your 2000.. but just not as beefy as your tractor. Also, the frame on my scoop is "L" channel angle iron, and thus weighs a bit less ( and not as strong ) as your tube scoop... In any event.. with the scoop loaded fully, I have never come close to loosing a pin, or flexing the frame whatsoever..no stress marks in the paint or at the welds.
Soundguy
<font color=green>Brent, here is a 24" hooked to a Yanmar YM2000, (about 1700 pounds). I was told by the dealer that a 30" would be too big for my tractor, and he may have been right. That's about 400# of rocks in there and I wouldn't want to carry any more than that.
