Lew3616
New member
I own a Mahindra 3616 with the 116sk loader, I seen a used set of Titan pallet forks for sale in the local classifieds, 2000lb 42" forks, will these fit on the 116 loader.
Thank You
Thank You
3616 116sk loader pallet forks?
- Thread starter Lew3616
- Start date
- Views: 1387
WM75Guy
Elite Member
Your loader and the forks both need to have the same attachment option, either quick attach, normally SSQA, or pin on. If they do the forks should fit. Changing between implements with a pin on loader was a pain so I switched my loader over to SSQA. Here is the thread.
www.tractorbynet.com
Switched 16LA FEL to Quick Attach
Yesterday I converted my 16LA to quick attach using the NH part. The last pin was a little tough as the bucket wanted to bind up after the first 3 came out. The bucket is at the welding shop getting the old fittings cut off and QA bracket attached. My dealer loaned me a bucket until mine is...
www.tractorbynet.com
OP
Lew3616
New member
Yes sir it's a quick attach pin on, so it will fit then.
Thank You!
Thank You!
DaBear3428
Platinum Member
quick attach and pin on are 2 different things, and there are like 4 different quick attach systems, john deere, skid steer, toro (which is a narrow skid steer i believe) and the euro quick attach. The most common type is the skid steer.