massiveSnow
New member
the 3720 comes standard with hst and without elect. cruise. Is there some mechanism for more or less holding a constant speed if the cruise option is not included?
3720 hst w/o cruise?
- Thread starter massiveSnow
- Start date
- Views: 1429
JimR
Elite Member
I would imagine there is a lever to lock the foot pedal on it somewhere.
Actually the 3720 does come standard with electronic cruise control. The standard cruise allows you only to set the speed and turn it off, but that may be enough for you. The optional automotive cruise upgrade kit gives you accelerate/decelerate/resume in addition to the speed set.
In my opinion the cruise works very well and will maintain a constant speed within 0.1-0.2 mph as long as the load doesn't go higher than the power available from the engine.
In my opinion the cruise works very well and will maintain a constant speed within 0.1-0.2 mph as long as the load doesn't go higher than the power available from the engine.
rockyridgefarm
Elite Member
here it is from Deere.com:
Automotive cruise/SpeedMatch and MotionMatch control upgrade kit consists of cruise and accel/decel/resume functions, SpeedMatch, and MotionMatch switches. This kit fits all 3120-4720 eHydro models cab and open station.
Automotive cruise allows the operator to accel, decel, and resume set speeds. SpeedMatch allows the operator to preset their maximum eHydro speed for operation. Ideal for applications requiring set speeds (spraying/aeration).
The MotionMatch switch allows the operator to make instant adjustments from short to long rollout and is ideal for operators that frequently change jobs (for example, from mowing to loader work)
SpeedMatch also works like a creeper gear.
This is a $90 uppgrade that is a very easy install. It is well worth having, but also makes a nice add on for later. (Print out the description with part numbers and lay it out conspicously before christmas, fathers day, or...)
Automotive cruise/SpeedMatch and MotionMatch control upgrade kit consists of cruise and accel/decel/resume functions, SpeedMatch, and MotionMatch switches. This kit fits all 3120-4720 eHydro models cab and open station.
Automotive cruise allows the operator to accel, decel, and resume set speeds. SpeedMatch allows the operator to preset their maximum eHydro speed for operation. Ideal for applications requiring set speeds (spraying/aeration).
The MotionMatch switch allows the operator to make instant adjustments from short to long rollout and is ideal for operators that frequently change jobs (for example, from mowing to loader work)
SpeedMatch also works like a creeper gear.
This is a $90 uppgrade that is a very easy install. It is well worth having, but also makes a nice add on for later. (Print out the description with part numbers and lay it out conspicously before christmas, fathers day, or...)
