3820 pay loader
- Thread starter madcow123
- Start date
- Views: 2558
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
:welcome:aboard.
Briana03
Elite Member
Welcome to TractorByNet!
I moved your thread to the Construction Equipment forum.
I moved your thread to the Construction Equipment forum.
Bob Rooks
Elite Member
I may not be able to help but if you would describe some of the symptoms someone else may be able to.
And :welcome:
Thanks!
I've seen vids online that shows another one moving rather effortlessly. Mine on the other hand takes quite a bit of throttle to make move. That and it will only go into low gear. The specs say it has two speeds. I cant get it over 5.1 mph but it is supposed to have a high gear that will take it up to 22. Granted this machine has sat for most of the past 15 years. Maybe a complete system flush is in order or there's a screen plugged up somewhere. I don't have any information about the transmission so I'm kinda poking in the dark.
I've seen vids online that shows another one moving rather effortlessly. Mine on the other hand takes quite a bit of throttle to make move. That and it will only go into low gear. The specs say it has two speeds. I cant get it over 5.1 mph but it is supposed to have a high gear that will take it up to 22. Granted this machine has sat for most of the past 15 years. Maybe a complete system flush is in order or there's a screen plugged up somewhere. I don't have any information about the transmission so I'm kinda poking in the dark.
