3rd function control handles for grapple

[Timber]

My toggle switch went on my grapple Handel and it's discontinued, I need to replace the joy stick, does anyone have any recommendations
thank you
Charlie

 

[Timber]

I keep getting data base errors on the search function

 

[Timber]

I just need a replacement handle on the joystick

 

[Timber]

I seem to be having a lot of trouble posting

 

[TomSeller]

I see 4 posts. Are you able to raise your FEL and curl the bucket?

 

[teg]

Timber hopefully this thread is not too old... it list a few...

http://www.tractorbynet.com/forums/hydraulics/141006-joystick-knob-w-12v-momentary.html

PS. yes the data base is going crazy.... I just ignore most of the warnings and carry on....

 

[Timber]

I see 4 posts. Are you able to raise your FEL and curl the bucket?

yea there is nothing wrong with the fell or the hydrolics. It's the toggle switch on the WR long joystick nob. The toggle switch is junk and it's been discontinued. I need a new joystick nob with a new toggle

 

[Timber]

It's been a long time since I have been in here

 

[N2DFire]

I used the John Deer grip for my 3rd Function build. Only draw back is that you have to wire in relays because the JD circuitry isn't rated for the kind of current the solenoid will pull.

See my new Write-up on page 3 for details and parts list.
http://www.tractorbynet.com/forums/customization/358086-kioti-ck-35-3rd-function-3.html

 

[jabelding]

Here is the one I used rated at 3 amps at 26v so normally no need for relays. around $150 with 2 buttons.
Sure Grip Controls