4110 Pics

[IRTEXN]

OK, I'm new here and all, but I just had to show ya'll a pic of my new baby. 4110 HST, 410 FEL and 413 cutter. Just put 3 hours on it yesterday and happy as a pig in #%@*. Thanks for all the great info and keep up all the good posts

 

[BWa]

Looks Good ,
Wish you many happy trouble free hours tractor riding
Bill G.

 

[Thomas]

Nice looking package you have there,and may many more hours enjoyment to come for you. /w3tcompact/icons/smile.gif

 

[GaryM]

Looks a lot like the 4100 I bought this Spring. I have the same loader and cutter and they work great!

A suggestion if I may?

Install some tie down rings on your trailer! I noticed that you have your rachet strap looped around a trailer upright. That can weaken your straps in no time at all.

 

[Buck]

IRTEXN,

Since GaryM is probably out on his tractor, what do you mean about those tie downs? That's how I do 'em too, except they are attached to metal loops level with the platform of the tractor.

Buck

 

[em14]

As Buick pointed out, I would weld some "upside-down" U shaped 3/8" (or something close to that size) round steel to the wide side (vertical side) of the trailer's channel to tie to ... you will find them helpful for many things ... I would put at least one per each open area between the vertical side rail supports of the sides ... you could skip where the wheel farings are ...

 

[IRTEXN]

Gary, Buck and EM,
Thanks for the suggestion on the tie down rings. I have a buddy with a welder and a TSC close by. Sounds like an easy fix

 

[JDGREEN4ME]

Congratulations! Still waiting for my 4110!

 

[Heath]

I also have the Deere 4110 with the 410 FEL and a handful of attachments and I'm starting to look at trailers. Can you tell me what size trailer is shown in your photo? I'm leaning toward a 6'10" x 18' 7000lb unit.
Thanks
Heath

 

[jyoutz]

Heath, I haul my 4100 with loader and attachments on a 16' dual axle trailer. Not alot of extra length, but everything does fit inside.