is there a link to a manual that shows how to work on the rockshaft? and adjust or repair this part that is sticking? Looking at the few parts I found on Ebay, they do not look like the valve on the tractor, so I am assuming that it comes apart to come off?
4200 hydraulic issues
- Thread starter whynot162
- Start date
- Views: 11943
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,593
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Have you looked up this tractor on jdparts.com to see the various parts and their assembly schematics?
Egon
Epic Contributor
[video] · Low oil level. · Hydraulic stop valve closed. · Excessive load on hitch. · Hydraulic oil too cold. · Hydraulic oil suction screen clogged. 3-POINT HITCH DROPS SLOWLY OR DOES NOT DROP · Rate-of-drop valve closed. · Rate-of-drop valve set too slowly. 3-POINT HITCH DROPS TOO FAST · Rate-of-drop set too fast. · Load too heavy.[/video]
Nother from manual. May/may not help???
Nother from manual. May/may not help???
This is a post that I had in 2009. It was a o-ring and fixed my problem. Hopes this helps
http://www.tractorbynet.com/forums/john-deere-owning-operating/151482-jd-4200-3-pt-goes.html?highlight=
http://www.tractorbynet.com/forums/john-deere-owning-operating/151482-jd-4200-3-pt-goes.html?highlight=
Thank you for all of the help, We replaced the shear pin and it works well now. Also soaked the area with pb blaster several times and it worked in and things are moving smooth. total cost of the repair, JD quoted $1500. he spent 0.20 on the shear pin, and about $5.00 on a can of PB blaster.
Egon
Epic Contributor
:thumbsup::thumbsup::thumbsup:
You done good.
You done good.
